Apex SM-10RE 19x10 Forged Wheel - 5x120 BP / ET25 / 72.56mm CB - Satin Black (BMW) SM10RE1910ET25-5120-7256-NSBK
The Apex SM-10RE was built for drivers who refuse to compromise when it comes to durability, stiffness, and track-ready performance. As the forged Enduro version of Apexs highly respected SM-10 platform, the SM-10RE was specifically engineered for endurance racing, aggressive HPDE use, high-downforce setups, and ultra-grip tire combinations where conventional lightweight wheels often fall short.
Rather than chasing the absolute lowest weight possible, Apex reinforced the SM-10RE in critical high-stress areas to create a wheel capable of surviving repeated punishment lap after lap. With approximately 30 percent more strength than the RS version, a reinforced Enduro Spec inner lip, and significantly stiffer spokes, the SM-10RE delivers exceptional durability without sacrificing steering precision or driver feedback.
Purpose-Built Enduro Strength
The SM-10RE features Apexs strongest Enduro Spec inner lip ever produced, incorporating 50 percent additional reinforcement to better withstand curbing impacts, potholes, berm strikes, and repeated race abuse. Apex also reinforced the front lip section to improve impact resistance during extreme track use.
Every wheel is manufactured from fully forged 6061-T6 aluminum using an advanced 10,000 ton forging process that improves grain structure while minimizing porosity for outstanding structural integrity and long-term durability.
Increased Rigidity for Better Performance
The redesigned side-milled spokes are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased rigidity helps minimize camber loss during heavy cornering loads, improving steering response, front-end feel, and tire wear consistency during demanding track sessions.
Extensive CNC side-milling removes unnecessary material without compromising structural integrity, allowing the SM-10RE to maintain excellent strength-to-weight characteristics despite its reinforced construction.
Advanced Motorsport Engineering
Unlike many wheels built from generic third-party forgings, Apex developed proprietary motorsport-specific blank profiles to optimize spoke geometry, concavity, brake clearance, and structural performance for demanding applications.
Extensive Finite Element Analysis was used throughout development to strengthen high-load areas while removing unnecessary material from low-stress zones. The result is a wheel engineered to handle extreme racing conditions with only a minimal weight increase over lighter Sprint Line alternatives.
The SM-10RE also incorporates vehicle-specific spoke profiles and a high-clearance barrel design developed using advanced 3D scanning technology to maximize compatibility with factory and aftermarket big brake kits.
Track-Focused Features Throughout
Additional race-focused details include paintless knurled beads to help minimize tire slippage during hard acceleration and braking, paintless barrels that reduce rotational inertia, oversized lug openings compatible with race lugs and impact sockets, and laser-engraved specifications for quick identification during trackside wheel changes.
Every Enduro Line wheel is independently tested by ITS in Michigan at loads and durations exceeding standard JWL requirements, providing additional confidence for endurance racing and aggressive track use.
Specifications
- Part Number: SM10RE1910ET25-5120-7256-NSBK
- Wheel Model: SM-10RE
- Wheel Size: 19x10
- Bolt Pattern: 5x120 BP
- Offset: ET25
- Center Bore: 72.56mm
- Finish: Satin Black
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Enduro Spec Reinforced Inner Lip
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for aggressive track and endurance racing use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spokes improve steering precision and responsiveness
- Heavy-duty Enduro Spec reinforced inner lip
- Reinforced front lip improves impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using an advanced 10,000 ton forging process
- FEA-optimized structure balances strength and weight reduction
- Deep side-milled spokes reduce unnecessary rotational mass
- Independently tested beyond standard JWL testing requirements
- Vehicle-specific spoke profiles developed using 3D scanning technology
- Deep concavity profile optimized for motorsport applications
- Paintless knurled bead helps reduce tire slippage
- Paintless barrel reduces rotational inertia
- Capless hub design eliminates unnecessary weight
- Oversized lug openings support race lugs and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for easy identification
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x120 BP and 72.56mm CB configurations.
Commonly used for BMW performance and track-focused BMW applications.
Always verify wheel clearance, brake clearance, suspension clearance, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE is Apexs reinforced Enduro version engineered specifically for endurance racing and high-load track environments. It features a stronger inner lip, increased load rating, stiffer spokes, and additional reinforcement throughout the wheel.
Will the SM-10RE clear aftermarket big brake kits?
Yes. Apex engineered the SM-10RE with advanced spoke geometry and a high-clearance barrel profile to maximize compatibility with many factory and aftermarket big brake systems.
Why Buy from Beefcake Racing?
Beefcake Racing provides premium performance parts, expert customer service, and competitive pricing for enthusiasts building serious street and track vehicles. Whether you need fitment assistance or complete performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
