Apex SM-10RE 19x10 Forged Wheel - 5x120 BP / ET25 / 72.56mm CB - Anthracite (BMW) SM10RE1910ET25-5120-7256-AN
The Apex SM-10RE was engineered for drivers who demand maximum strength, rigidity, and endurance-focused performance under the harshest track conditions imaginable. Built as the forged Enduro version of Apexs proven SM-10 platform, the SM-10RE is specifically designed for high-grip tire compounds, heavy aero loads, endurance racing, and aggressive track driving where traditional lightweight wheels can become a weak point.
Instead of focusing solely on minimizing weight, Apex reinforced the SM-10RE in critical high-load areas to dramatically improve durability and stiffness. Featuring a reinforced Enduro Spec inner lip, stiffer spoke construction, and an impressive 2100 lb load rating, the SM-10RE delivers approximately 30 percent greater strength than the RS version while maintaining excellent steering response and driver confidence.
Built for Serious Motorsport Abuse
The SM-10RE features Apexs strongest Enduro Spec inner lip to date, utilizing 50 percent additional reinforcement to better withstand aggressive curbing, potholes, berm strikes, and repeated race abuse. Apex also strengthened the front lip area for improved durability in extreme track environments.
Every wheel is manufactured from fully forged 6061-T6 aluminum using an enormous 10,000 ton forging process that enhances grain structure and reduces material porosity for exceptional structural integrity.
Increased Stiffness for Better Performance
Wheel stiffness plays a major role in steering precision and tire stability during hard cornering. The SM-10RE utilizes redesigned side-milled spokes that are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels, helping reduce camber loss and improving steering feel, responsiveness, and tire wear consistency.
Precision CNC side-milling removes unnecessary material while preserving structural strength, helping the wheel maintain excellent strength-to-weight characteristics despite its reinforced design.
Race-Focused Engineering and Brake Clearance
Apex developed proprietary motorsport-specific forging blanks for the SM-10RE rather than relying on generic third-party forgings. This allows greater control over spoke shape, concavity, brake clearance, and structural optimization.
Extensive Finite Element Analysis was used throughout development to strengthen high-stress areas while reducing unnecessary mass from low-load zones. The result is a wheel capable of surviving extreme racing conditions with only a minimal weight increase over lighter Sprint Line alternatives.
The SM-10RE also features advanced spoke geometry and a high-clearance barrel profile developed using 3D scanning technology to maximize compatibility with factory and aftermarket big brake kits.
Track-Ready Features Throughout
Additional motorsport-focused details include paintless knurled beads that help minimize tire slippage under hard acceleration and braking, paintless barrels that reduce rotational inertia, oversized lug openings compatible with impact sockets and race lugs, and laser-engraved specifications for quick trackside identification.
Every Enduro Line wheel is independently tested by ITS in Michigan to loads and durations that exceed standard JWL testing requirements, delivering additional confidence during endurance racing and high-performance driving.
Specifications
- Part Number: SM10RE1910ET25-5120-7256-AN
- Wheel Model: SM-10RE
- Wheel Size: 19x10
- Bolt Pattern: 5x120 BP
- Offset: ET25
- Center Bore: 72.56mm
- Finish: Anthracite
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Enduro Spec Reinforced Inner Lip
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for endurance racing and extreme track use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spokes improve steering precision and stability
- Heavy-duty Enduro Spec reinforced inner lip
- Reinforced front lip improves impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using an advanced 10,000 ton forging process
- FEA-optimized structure balances strength and weight savings
- Deep side-milled spokes reduce unnecessary rotational mass
- Independently tested beyond standard JWL testing requirements
- Vehicle-specific spoke profiles engineered using 3D scanning technology
- Deep concavity profile optimized for performance applications
- Paintless knurled bead helps reduce tire slippage
- Paintless barrel reduces rotational inertia
- Capless hub design eliminates unnecessary weight
- Oversized lug openings support race lugs and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for easy identification
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x120 BP and 72.56mm CB configurations.
Commonly used for BMW performance and track-focused BMW applications.
Always verify wheel clearance, brake clearance, suspension clearance, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE is Apexs reinforced Enduro version designed specifically for endurance racing and aggressive track use. It features a stronger inner lip, increased load rating, stiffer spokes, and additional reinforcement throughout the wheel structure.
Will the SM-10RE clear aftermarket big brake kits?
Yes. Apex engineered the SM-10RE using advanced spoke geometry and high-clearance barrel profiles to maximize compatibility with many factory and aftermarket big brake systems.
Why Buy from Beefcake Racing?
Beefcake Racing provides premium performance parts, expert customer service, and competitive pricing for enthusiasts building serious street and track vehicles. Whether you need fitment assistance or full performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
