Apex SM-10RE 18x10 Forged Wheel - 5x130 BP / ET36 / 71.6mm CB - Anthracite (Porsche) SM10RE1810ET36-5130-716-AN
The Apex SM-10RE was built for drivers who push their cars to the limit and need a wheel engineered to survive the punishment of serious motorsport use. As the forged Enduro version of the proven SM-10 platform, the SM-10RE delivers substantially increased strength, enhanced rigidity, and race-ready durability for endurance racing, aggressive track driving, high-downforce applications, and sticky tire compounds.
While many motorsport wheels focus entirely on reducing weight, the SM-10RE takes a more balanced engineering approach by reinforcing the areas that matter most under extreme load. Featuring a heavy-duty Enduro Spec inner lip, redesigned stiffer spokes, and fully forged 6061-T6 aluminum construction, the SM-10RE is approximately 30 percent stronger than the RS version while maintaining outstanding responsiveness and steering feel.
Designed for Extreme Track Environments
The SM-10RE features Apexs strongest Enduro Spec inner lip to date, reinforced with 50 percent additional material to better withstand potholes, harsh curbing, berm impacts, and off-track excursions. Apex also reinforced the front lip area to increase durability during aggressive track use and endurance racing conditions.
Each wheel is forged using an enormous 10,000 ton forging process that improves aluminum grain structure while eliminating porosity for exceptional structural strength and long-term reliability.
Stiffer Spokes for Better Driver Feedback
The redesigned side-milled spokes are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased wheel rigidity helps reduce camber loss during hard cornering, improving steering response, tire contact consistency, and overall driver confidence during demanding track sessions.
Extensive side-milling removes unnecessary material while maintaining critical strength, helping reduce rotational mass without compromising durability.
Advanced Motorsport Engineering
Unlike many manufacturers that rely on generic third-party forgings, Apex developed proprietary motorsport-specific blank profiles to maximize brake clearance, optimize spoke geometry, and allow for deeper concavity profiles. Extensive Finite Element Analysis testing was used throughout development to reinforce high-stress areas while removing unnecessary material in low-load sections.
The SM-10RE also features paintless knurled beads to help reduce tire slippage during repeated braking and acceleration, while the paintless barrel design helps minimize rotational inertia for improved performance.
Track-Focused Features Throughout
Additional motorsport-inspired details include oversized lug openings designed for impact sockets and race lugs, laser-engraved wheel specifications for easy identification, outer lip pocketing to reduce rotational mass, and a capless hub design that eliminates unnecessary weight.
The SM-10RE is independently tested by ITS in Michigan using significantly higher loads and longer durations than standard JWL testing requirements, validating its ability to withstand real-world endurance racing abuse.
Specifications
- Part Number: SM10RE1810ET36-5130-716-AN
- Wheel Model: SM-10RE
- Wheel Size: 18x10
- Bolt Pattern: 5x130 BP
- Offset: ET36
- Center Bore: 71.6mm
- Finish: Anthracite
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Heavy-Duty Enduro Spec Reinforcement
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for extreme track and endurance use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spoke design improves steering response
- Heavy-duty Enduro Spec inner lip with 50 percent more reinforcement
- Reinforced front lip for improved impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using a massive 10,000 ton forging process
- Wide side-milled spokes reduce unnecessary weight while maintaining strength
- FEA-optimized structure balances durability and rotational mass
- Independently tested beyond standard JWL requirements
- Vehicle-specific spoke profiles engineered using 3D scanning technology
- Deep concavity profile optimized for performance applications
- Paintless knurled bead helps reduce tire slippage
- Paintless outer barrel reduces rotational inertia
- Capless hub design reduces unnecessary weight
- Compatible with oversized race lugs and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for long-term visibility
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x130 BP and 71.6mm CB configurations.
Commonly used for high-performance Porsche applications and track-focused setups.
Always verify wheel clearance, brake clearance, suspension clearance, and tire sizing before installation.
FAQs
What makes the SM-10RE ideal for endurance racing?
The SM-10RE was engineered specifically for high-load motorsport environments with reinforced lips, increased spoke stiffness, forged construction, and a massive 2100 pound load rating for long-term durability under repeated abuse.
Will the SM-10RE clear large aftermarket brake kits?
Yes. Apex designed the SM-10RE using vehicle-specific spoke geometry and advanced barrel profiles to maximize brake clearance for many high-performance braking systems. Brake fitment should always be verified prior to installation.
Why Buy from Beefcake Racing?
Beefcake Racing delivers premium performance parts, expert customer support, and competitive pricing for enthusiasts building serious street and track cars. Whether you need wheel fitment guidance or complete performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
