Apex SM-10RE 18x10 Forged Wheel - 5x120 BP / ET25 / 72.56mm CB - Satin Black (BMW) SM10RE1810ET25-5120-7256-NSBK
The Apex SM-10RE was developed for drivers who demand uncompromising strength, rigidity, and durability from their wheel setup. As the forged Enduro version of the proven SM-10 platform, the SM-10RE was engineered specifically for endurance racing, aggressive track driving, high-grip tire compounds, and high-load applications where standard lightweight wheels are pushed beyond their limits.
Rather than focusing exclusively on reducing weight, Apex engineered the SM-10RE to increase structural strength and stiffness in critical areas without sacrificing overall performance. Featuring a reinforced Enduro Spec inner lip, redesigned stiffer spokes, and fully forged 6061-T6 aluminum construction, the SM-10RE delivers approximately 30 percent greater strength than the RS version while improving steering response, stability, and long-term durability under demanding motorsport conditions.
Built for Serious Track Abuse
The SM-10RE incorporates Apexs strongest Enduro Spec inner lip ever produced, reinforced with 50 percent additional material to better survive potholes, harsh curbing, berm strikes, and off-track excursions. Additional reinforcement in the front lip area improves impact durability during aggressive track use.
Every wheel is produced using a massive 10,000 ton forging process that improves aluminum grain structure and eliminates porosity for exceptional structural integrity and long-term durability.
Stiffer Spokes for Improved Performance
The redesigned side-milled spokes are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased rigidity helps reduce camber loss during hard cornering, improving steering precision, tire wear consistency, and overall driver confidence.
Extensive side-milling removes unnecessary material while maintaining critical structural strength, helping keep rotational weight impressively low for a wheel with this level of reinforcement.
Advanced Motorsport Engineering
Unlike many wheel manufacturers that rely on generic third-party forgings, Apex developed proprietary motorsport-specific blank profiles to optimize brake clearance, spoke geometry, and concavity. Extensive Finite Element Analysis testing allowed Apex engineers to strengthen high-load areas while reducing unnecessary material in low-stress sections.
The SM-10RE also features paintless knurled beads to help prevent tire slippage during repeated acceleration and braking, along with a paintless barrel that reduces rotational inertia where weight savings deliver the greatest performance benefit.
Track-Focused Features Throughout
Additional motorsport-focused details include oversized lug openings compatible with impact sockets and race lugs, laser-engraved wheel specifications for easy identification, outer lip pocketing to further reduce rotational mass, and a capless hub design to eliminate unnecessary weight.
The SM-10RE is independently tested by ITS in Michigan using significantly higher loads and longer durations than standard JWL testing requirements, validating its ability to withstand real-world motorsport abuse.
Specifications
- Part Number: SM10RE1810ET25-5120-7256-NSBK
- Wheel Model: SM-10RE
- Wheel Size: 18x10
- Bolt Pattern: 5x120 BP
- Offset: ET25
- Center Bore: 72.56mm
- Finish: Satin Black
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Heavy-Duty Enduro Spec Reinforcement
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for extreme track and endurance use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spoke design improves steering response
- Heavy-duty Enduro Spec inner lip with 50 percent more reinforcement
- Reinforced front lip for improved impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using a massive 10,000 ton forging process
- Wide side-milled spokes reduce unnecessary weight while maintaining strength
- FEA-optimized structure balances durability and rotational mass
- Independently tested beyond standard JWL requirements
- Vehicle-specific spoke profiles engineered using 3D scanning technology
- Deep concavity profile optimized for performance applications
- Paintless knurled bead helps reduce tire slippage
- Paintless outer barrel reduces rotational inertia
- Capless hub design reduces unnecessary weight
- Compatible with oversized race lugs and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for long-term visibility
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x120 BP and 72.56mm CB configurations.
Commonly used for high-performance BMW applications and track-focused setups.
Always verify wheel clearance, brake clearance, suspension clearance, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE was specifically engineered for endurance racing and extreme track environments with reinforced lips, stiffer spokes, increased load capacity, and enhanced durability compared to lighter Sprint Line and RS variants.
Can the SM-10RE support large aftermarket brake kits?
Yes. Apex designed the SM-10RE using advanced spoke geometry and high-clearance barrel profiles to accommodate many large brake systems. Brake fitment should always be verified prior to installation.
Why Buy from Beefcake Racing?
Beefcake Racing provides premium performance parts, competitive pricing, and expert customer support for enthusiasts building serious street and track vehicles. Whether you need wheel fitment guidance or complete performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
