Apex SM-10RE 18x10.5 Forged Wheel - 5x130 BP / ET44 / 71.6mm CB - Anthracite (Porsche) SM10RE18105ET44-5130-716-AN
The Apex SM-10RE is the ultimate endurance-focused evolution of the proven SM-10 design, engineered specifically for drivers who demand maximum strength, stiffness, and durability under the harshest track conditions. Built for high-grip tire setups, aero-equipped cars, endurance racing, and aggressive performance driving, the SM-10RE was developed to survive repeated abuse lap after lap without compromising responsiveness or brake clearance.
Unlike lightweight-focused wheel designs that prioritize shaving every ounce possible, the SM-10RE takes a different approach by increasing structural strength where serious drivers actually need it. Featuring Apexs strongest Enduro Spec inner lip, reinforced front lip construction, and redesigned stiffer spokes, this forged wheel delivers the durability needed for punishing track use while maintaining the lightweight benefits of fully forged 6061-T6 aluminum construction.
Purpose-Built Endurance Performance
The SM-10RE is approximately 30 percent stronger than the RS version and features spokes that are roughly 20 to 25 percent stiffer than Sprint Line wheels. Increased wheel stiffness helps reduce camber loss during heavy cornering loads, improving steering feel, responsiveness, and tire wear consistency during aggressive driving.
Apex engineered the SM-10RE using proprietary motorsport-specific forgings produced under immense 10,000 ton forging pressure. This process improves the aluminum grain structure, eliminates porosity, and creates an incredibly strong wheel capable of handling extreme motorsport abuse.
Engineered for Real Motorsport Abuse
The Enduro Spec inner lip receives 50 percent additional reinforcement compared to lighter wheel designs, helping protect against curbing impacts, potholes, berm strikes, and off-track excursions. Apex also added reinforcement to the front lip area for additional durability during aggressive track driving.
Track-focused features continue throughout the entire wheel design, including paintless knurled beads to reduce tire slippage under repeated braking and acceleration, oversized lug openings for impact socket compatibility, and laser-engraved wheel specs for quick identification in the paddock or garage.
Advanced Forged Motorsport Technology
Rather than relying on generic third-party forgings, Apex developed its own motorsport-specific blank profiles to maximize brake clearance, optimize spoke geometry, and allow for deeper concavity profiles without sacrificing structural integrity. Extensive Finite Element Analysis testing allowed engineers to reinforce critical stress zones while removing unnecessary material to reduce rotational inertia.
The result is a forged endurance wheel that delivers exceptional strength with minimal weight penalty over lighter Sprint Line alternatives.
Specifications
- Part Number: SM10RE18105ET44-5130-716-AN
- Wheel Model: SM-10RE
- Wheel Size: 18x10.5
- Bolt Pattern: 5x130 BP
- Offset: ET44
- Center Bore: 71.6mm
- Finish: Anthracite
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Heavy-Duty Enduro Spec Reinforcement
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for extreme track and endurance use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spoke design improves responsiveness
- Heavy-duty Enduro Spec inner lip with 50 percent more reinforcement
- Reinforced front lip for increased impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using a massive 10,000 ton forging process
- Wide side-milled spokes reduce unnecessary weight while maintaining strength
- FEA-optimized structure balances strength and rotational weight
- Independently tested beyond standard JWL requirements
- Vehicle-specific spoke profiles engineered using 3D scanning technology
- Deep concavity profile optimized for performance applications
- Paintless knurled bead helps prevent tire slippage
- Paintless outer barrel reduces rotational inertia
- Capless hub design reduces unnecessary weight
- Compatible with oversized race lugs and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for long-term visibility
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x130 BP and 71.6mm CB configurations.
Commonly used for high-performance Porsche applications.
Always verify wheel clearance, brake clearance, suspension clearance, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE was engineered specifically for endurance racing and high-load track environments. It features increased strength, stiffer spokes, reinforced lips, and a higher load rating compared to standard SM-10 or RS variants.
Are these wheels designed for big brake kits?
Yes. Apex designed the SM-10RE with massive brake clearance using vehicle-specific spoke profiles and high-clearance barrel geometry. Brake fitment should still be verified prior to installation.
Why Buy from Beefcake Racing?
Beefcake Racing is dedicated to helping enthusiasts build faster, stronger, and more capable street and track vehicles with proven performance parts from the industrys top manufacturers. Whether you need wheel fitment assistance, suspension guidance, or track-ready recommendations, our team is here to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
