Apex ML-10RT 19x11 Forged Touring Wheel 5x112 BP / ET22 / 66.6mm CB - Anthracite Machined Lip (BMW) (ML10RT1911ET22-5112-666-MLAN)
The Apex ML-10RT combines timeless touring car styling with cutting-edge forged wheel engineering to deliver a wheel that looks as good parked at a show as it performs on the track. Designed specifically for BMW applications, this 19x11 forged wheel utilizes advanced monoblock construction to provide exceptional strength, reduced weight, and increased stiffness compared to traditional multi-piece designs.
Finished in Anthracite with a striking Machined Lip, the ML-10RT pays tribute to the legendary motorsport wheels that defined an era while incorporating the latest advancements in forging technology. From its aggressively side-milled spokes and reinforced Sprint Spec inner lip to its vehicle-specific spoke profiles and independent testing, every detail is engineered to maximize performance, durability, and visual impact.
Quick Specs
- Part Number: ML10RT1911ET22-5112-666-MLAN
- Wheel Diameter: 19 inches
- Wheel Width: 11 inches
- Bolt Pattern: 5x112
- Offset: ET22
- Center Bore: 66.6mm
- Finish: Anthracite Machined Lip
- Construction: Fully Forged Monoblock
- Wheel Series: Apex Forged Touring Line
- Center Cap Compatibility: OEM and Apex Center Caps
- TPMS Compatible: Yes
- Hub Centric Design: Yes
Features
- Fully forged monoblock construction engineered for maximum strength and reduced weight.
- Classic motorsport-inspired mesh design updated with modern forging technology.
- Deep side-milled spokes reduce weight while maintaining structural integrity.
- Precision CNC machining removes excess material without compromising strength.
- Sprint Spec inner lip technology provides approximately 50% more reinforcement than a conventional inner lip.
- Enhanced durability against potholes, curbing, and track-related impacts.
- Manufactured using a 10,000-ton forging process for improved grain structure and strength.
- Custom-developed motorsport blanks optimize brake clearance, spoke design, and wheel performance.
- Independently tested by ITS beyond standard JWL testing requirements.
- Machined lip protected by a durable gloss clear coat that requires no polishing.
- Consistent 1.5 inch outer lip delivers a deep-lip appearance across all wheel sizes.
- Vehicle-specific spoke profiles maximize brake clearance and spoke concavity.
- Compatible with oversized race lug nuts and impact sockets.
- OEM center cap compatibility for a factory-inspired appearance.
- Laser-engraved wheel specifications remain visible and easy to read.
- Hub-centric design eliminates the need for centering rings in most applications.
- Compatible with OEM and aftermarket TPMS sensors.
- Designed to utilize OEM mounting hardware where applicable.
- Compatible with wheel spacers, stud conversion kits, and wheel locks.
- Includes gloss black Apex center cap.
Forged Performance Inspired by Racing Heritage
The ML-10RT originated as an engineering passion project before becoming one of Apex's most distinctive forged wheel offerings. While the design pays homage to the iconic touring and sports car wheels of decades past, the engineering behind it is thoroughly modern. The result is a wheel that delivers measurable gains in strength, stiffness, and weight reduction while maintaining an unmistakable motorsport appearance.
Advanced Side-Milled Spoke Design
Each spoke incorporates extensive side milling performed with precision CNC ball cutters. By removing excess material that does not contribute to structural performance, Apex reduces rotational mass while preserving the strength required for high-performance driving. This design also creates the sharp visual contrast that gives the ML-10RT its unique character.
Sprint Spec Inner Lip Technology
Borrowed directly from Apex's race-proven Sprint Line wheels, the reinforced inner lip adds substantial strength to one of the wheel's most vulnerable areas. Additional material is strategically placed where impacts occur most often, improving durability during aggressive driving and helping protect against road hazards.
Vehicle-Specific Brake Clearance Engineering
The ML-10RT's distinctive lipped design naturally creates brake clearance challenges. Apex solves this through extensive 3D vehicle scanning and application-specific spoke profiles that balance brake clearance, spoke concavity, and aesthetics. The result is a wheel that looks aggressive while maintaining proper fitment for performance brake packages.
Independently Tested for Confidence
Every Touring Line wheel is independently tested by ITS in Michigan. These tests exceed traditional JWL requirements by utilizing higher loads and longer testing durations, ensuring durability and performance under real-world driving conditions.
Fitment
- Applications Utilizing 5x112 Bolt Pattern and 66.6mm Center Bore
- Verify Brake Clearance, Suspension Clearance, and Tire Fitment Prior to Installation
FAQs
Does the machined lip require regular polishing?
No. The machined lip features a durable gloss clear coat that protects the finish and eliminates the need for polishing.
Can I use my factory BMW center caps and TPMS sensors?
Yes. The ML-10RT is engineered to accept OEM center caps where applicable and is compatible with both OEM and aftermarket TPMS sensors.
Why Buy from Beefcake Racing?
When you're investing in premium forged wheels, expert support matters. Beefcake Racing provides competitive pricing, fast shipping, knowledgeable technical assistance, and outstanding customer service to help ensure your wheel setup is right the first time.
Contact Beefcake Racing today:
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
