Apex ML-10RT 18x9 Forged Touring Wheel 5x112 BP / ET42 / 57.1mm CB - Anthracite Machined Lip (Audi - Small Bore) - ML10RT189ET42-5112-571-MLAN
The Apex ML-10RT was created for enthusiasts who appreciate classic touring car styling but demand modern forged-wheel performance. Designed as part of Apex's Forged Touring Line, this 18x9 wheel combines a timeless mesh design with advanced monoblock forging technology to deliver exceptional strength, stiffness, and reduced weight. The Anthracite finish paired with the signature machined lip creates a motorsport-inspired appearance that looks equally at home on a street-driven Audi or a dedicated track machine.
Unlike traditional multi-piece wheels that inspired its design, the ML-10RT utilizes cutting-edge forging processes, vehicle-specific engineering, and extensive testing to provide the performance advantages serious drivers expect. From its side-milled spokes and reinforced Sprint Spec inner lip to its optimized brake clearance and OEM center cap compatibility, every detail was developed with real-world enthusiasts in mind.
Quick Specs
- Part Number: ML10RT189ET42-5112-571-MLAN
- Wheel Size: 18x9
- Bolt Pattern: 5x112
- Offset: ET42
- Center Bore: 57.1mm
- Finish: Anthracite Machined Lip
- Construction: Fully Forged 6061-T6 Aluminum
- Weight: 19.9 lbs
- Load Rating: 1,600 lbs
- Face Profile: Profile 2
- Lug Seat: R13 Ball Seat
- Center Cap: Gloss Black Included
- OEM Center Cap Compatible: Yes
- TPMS Compatible: Yes
- Independently Tested By: ITS
Features
- Fully forged monoblock wheel engineered for maximum strength and reduced weight.
- Inspired by iconic touring car and sports car race wheel designs.
- Extra-deep side-milled spokes remove unnecessary material while maintaining structural integrity.
- Sprint Spec inner lip adds 32% more material in critical impact zones.
- Up to 50% more reinforcement than a standard inner lip design.
- Produced using a 10,000-ton forging process for improved grain structure and strength.
- Manufactured from proprietary motorsport-focused forged blanks.
- Independently tested by ITS to standards exceeding traditional JWL requirements.
- Machined outer lip with gloss clear coat for classic motorsport styling without requiring polishing.
- Consistent 1.5-inch outer lip design across all wheel sizes.
- Vehicle-specific spoke profiles optimize brake clearance and concavity.
- Built to accommodate oversized race lugs and impact sockets.
- Flush-mounted OEM center cap compatibility for a factory-plus appearance.
- Laser-engraved barrel specifications for long-term readability.
- Hub-centric design minimizes the need for centering rings.
- Compatible with OEM and aftermarket TPMS sensors.
- Works with OEM mounting hardware on applicable vehicles.
Engineered for Modern Audi Performance
The ML-10RT delivers much more than vintage-inspired styling. Apex engineers developed this wheel around extensive 3D vehicle scans to maximize brake clearance while preserving the aggressive concavity enthusiasts want. The result is a forged wheel that performs under demanding track conditions while maintaining the visual impact of classic motorsport designs.
Strength Where It Matters Most
Apex incorporated its proven Sprint Spec inner lip technology into the ML-10RT to reinforce one of the wheel's most vulnerable impact areas. Combined with the high-pressure forging process and motorsport-specific blank design, the ML-10RT is engineered to withstand the abuse of track use, rough pavement, and daily driving without sacrificing weight savings.
Fitment
- Applications Utilizing 5x112 BP and 57.1mm Center Bore
- Audi and Volkswagen Small Bore Applications
- Verify Brake Clearance, Suspension Clearance, and Tire Fitment Prior to Installation
FAQs
Does the ML-10RT accept OEM Audi center caps?
Yes. Apex engineered the ML-10RT with OEM center cap compatibility, allowing owners to retain a factory-inspired appearance if desired.
Can I use factory TPMS sensors with this wheel?
Yes. The ML-10RT accepts both OEM and aftermarket TPMS sensors along with standard valve stems.
Why Buy from Beefcake Racing?
When you're investing in premium forged wheels, you want expert support before and after the sale. Beefcake Racing provides enthusiasts with industry-leading customer service, competitive pricing, and knowledgeable product support to help ensure you get the right setup for your vehicle.
Contact Beefcake Racing today:
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
