Apex EC-7RS 19x12 Forged Wheel 5x130 BP / ET46 / 71.6mm CB - Anthracite (Porsche) (EC7RS1912ET46-5130-716-AN)
The Apex EC-7RS represents the ultimate lightweight evolution of the legendary EC-7 design. Developed as part of Apex's Sprint Line forged wheel collection, the EC-7RS combines cutting-edge motorsport engineering, reduced rotational mass, and exceptional structural strength to help serious drivers maximize performance on both the street and the racetrack.
Finished in a sophisticated Anthracite finish, this 19x12 forged wheel delivers the ideal combination of aggressive styling, race-proven durability, and advanced engineering. Featuring proprietary forged blanks, side-milled spokes, a reinforced Sprint Spec inner lip, and exceptional brake clearance, the EC-7RS is engineered for enthusiasts who refuse to compromise.
Quick Specs
- Part Number: EC7RS1912ET46-5130-716-AN
- Wheel Diameter: 19 inches
- Wheel Width: 12 inches
- Bolt Pattern: 5x130
- Offset: ET46
- Center Bore: 71.6mm
- Finish: Anthracite
- Construction: Fully Forged 6061-T6 Aluminum
- Wheel Series: Sprint Line
- Hub Centric Design
- TPMS Compatible
- Center Cap Included
Built from Proprietary Motorsport Forgings
Unlike many wheel manufacturers that utilize generic third-party forgings, Apex develops its own dedicated motorsport forging blanks. This allows complete control over wheel architecture, spoke geometry, brake clearance, concavity profiles, and overall performance characteristics. The result is a forged wheel engineered specifically for enthusiasts who demand the highest levels of performance.
10,000 Tons of Forging Pressure
Each EC-7RS begins as a forged 6061-T6 aluminum blank weighing up to 120 pounds before machining. Specialized equipment capable of producing 10,000 metric tons of pressure creates an exceptionally dense aluminum structure with improved grain flow and reduced porosity. This process creates a stronger foundation that supports aggressive weight reduction while maintaining durability.
Side-Milled Spokes for Maximum Weight Savings
A defining feature of the EC-7RS is its advanced side-milled spoke design. Precision CNC machining removes material from non-critical areas while preserving structural integrity. This extensive machining process reduces rotational weight and improves responsiveness without sacrificing strength.
Lightweight Performance Without Compromise
Rather than pursuing the lowest possible weight at the expense of durability, Apex engineers carefully optimized the EC-7RS by strategically reinforcing critical load-bearing areas after removing unnecessary material. This approach results in a stronger, more durable wheel capable of handling demanding performance environments.
FEA-Optimized Engineering
Extensive Finite Element Analysis was utilized throughout development to identify high-stress zones and optimize material placement. The result is a forged wheel that achieves exceptional strength-to-weight ratios while maintaining the reliability expected from a premium motorsport product.
Independent Third-Party Testing
Apex validates the EC-7RS through independent laboratory testing rather than relying solely on computer simulations or in-house procedures. Testing exceeds standard JWL requirements through increased loads, longer test durations, and more demanding impact evaluations.
Sprint Spec Inner Lip Technology
The EC-7RS incorporates Apex's Sprint Spec inner lip profile, featuring a reinforced channel design engineered to improve impact resistance. Despite significant weight savings compared to many alternatives, the inner lip remains exceptionally strong and durable.
Massive Brake Clearance Capability
Using extensive 3D laser scanning and application-specific engineering, Apex developed a high-clearance barrel profile and optimized spoke design capable of accommodating many large factory and aftermarket brake packages. This allows enthusiasts to run serious braking systems without sacrificing wheel performance.
Deep Concavity and Aggressive Styling
The forged architecture of the EC-7RS allows for deeper concave profiles than traditional wheel designs. Every profile is engineered specifically for its intended application, balancing aesthetics, brake clearance, and structural performance.
Paintless Knurled Bead Seats
Hard acceleration and heavy braking can cause tire movement along the bead seat. Apex combats this issue by utilizing paintless knurled bead seats that maintain maximum grip between the wheel and tire, helping reduce tire slippage and balance issues during aggressive driving.
Track-Focused Features
The EC-7RS is designed with racers and track enthusiasts in mind. Oversized race lug compatibility allows the use of impact sockets for rapid wheel changes, while laser-engraved barrel specifications make identification easy during service and maintenance.
OEM Compatibility
This wheel accepts OEM and aftermarket TPMS sensors, standard valve stems, factory mounting hardware, wheel locks, stud conversion kits, and most wheel spacers. Every EC-7RS includes a gloss black Apex center cap and supports select OE center cap compatibility where applicable.
Features
- 10K Ton Forged 6061-T6 Aluminum Construction
- Proprietary Motorsport Forging Blank Design
- Advanced Side-Milled Spokes
- Sprint Spec Reinforced Inner Lip
- Independent Third-Party Testing Beyond JWL Standards
- Massive Brake Clearance Engineering
- Deep Concavity Profiles
- FEA Optimized Structure
- Paintless Knurled Bead Seats
- Impact Socket Compatible Design
- Laser-Engraved Barrel Specifications
- Hub-Centric Construction
- OEM and Aftermarket TPMS Compatible
- Gloss Black Center Cap Included
- Premium Anthracite Finish
Fitment
- Applications Utilizing 5x130 Bolt Pattern and 71.6mm Center Bore
- Verify Brake Clearance, Suspension Clearance, and Tire Fitment Prior to Installation
FAQs
What makes the EC-7RS different from traditional forged wheels?
The EC-7RS combines proprietary forged blanks, side-milled spokes, Sprint Spec reinforcement, advanced FEA optimization, and independent testing to achieve exceptional performance and durability.
Can this wheel be used with factory TPMS sensors?
Yes. The EC-7RS accepts both OEM and aftermarket TPMS sensors along with standard valve stems.
Why Buy from Beefcake Racing?
At Beefcake Racing, we help enthusiasts build faster, more capable vehicles with premium performance products backed by expert support, competitive pricing, and fast shipping. Whether you're building a dedicated track machine or upgrading your weekend toy, our team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
