Apex EC-7RS 18x10 Forged Wheel (EC7RS1810ET25-5120-7256-AN) - BMW
If you're chasing every last tenth at the track without sacrificing durability, the Apex EC-7RS delivers exactly what serious drivers demand. As part of Apex's Sprint Line of fully forged wheels, the EC-7RS takes the proven EC-7 design and pushes it even further with reduced weight, increased strength, deeper engineering, and race-focused features developed through years of motorsport experience. The result is a lightweight forged wheel engineered to withstand the demands of aggressive track use while maintaining the reliability needed for street-driven performance vehicles.
Unlike conventional forged wheels built around generic blanks, the EC-7RS starts with proprietary motorsport-focused forgings developed specifically by Apex. Combined with extensive FEA optimization, side-milled spokes, a reinforced Sprint Spec inner lip, and independent testing beyond JWL standards, this wheel delivers exceptional performance without compromising structural integrity. Whether you're attacking apexes, chasing personal bests, or upgrading your BMW's appearance and capability, the EC-7RS is engineered to perform under pressure.
Quick Specs
- Part Number: EC7RS1810ET25-5120-7256-AN
- Wheel Model: EC-7RS
- Wheel Size: 18x10
- Bolt Pattern: 5x120
- Offset: ET25
- Center Bore: 72.56mm
- Finish: Anthracite
- Construction: Fully Forged 6061-T6 Aluminum
- Product Line: Sprint Line
- Hub Centric Design
- Vehicle Application: BMW
Features
- 10K Ton forged 6061-T6 aluminum construction
- Sprint Line lightweight forged wheel design
- Side-milled spokes for significant weight reduction
- Reinforced Sprint Spec inner lip for improved impact resistance
- Purpose-built motorsport forging blanks
- Extensive Finite Element Analysis optimization
- Independent third-party testing beyond JWL requirements
- Massive brake clearance through advanced barrel design
- Vehicle-specific spoke profiles for optimized fitment
- Deep concave spoke profile design
- Paintless knurled bead seats for improved tire retention
- Built to accommodate oversized race lugs and impact sockets
- Laser-engraved wheel specifications for easy identification
- Hub-centric fitment design
- Compatible with OEM and aftermarket TPMS sensors
- Works with OEM mounting hardware and most wheel spacers
- Gloss black center cap included
- Compatible with OEM center caps on applicable vehicles
Engineered for Lightweight Strength
The EC-7RS begins life as an enormous forged aluminum blank weighing up to 120 pounds. Formed under an incredible 10,000 metric tons of pressure, the forging process enhances aluminum grain structure while minimizing porosity, resulting in exceptional strength and consistency. Apex then machines away every gram of unnecessary material while strategically reinforcing critical load-bearing areas to create a wheel that is both remarkably lightweight and highly durable.
Motorsport-Focused Design
Unlike many wheels that rely on off-the-shelf forgings, the EC-7RS utilizes proprietary blank designs created specifically for motorsport applications. This allows Apex engineers to optimize brake clearance, concavity, spoke geometry, and overall wheel strength without the compromises commonly associated with generic forged blanks.
Advanced Side-Milled Spokes
One of the defining upgrades found on the EC-7RS is its aggressively side-milled spoke design. Precision CNC machining removes excess material from the sides of each spoke while maintaining structural integrity, reducing rotational mass and helping drivers maximize acceleration, braking, and handling performance.
Track-Proven Durability
The EC-7RS was developed with a simple philosophy: lightweight should never mean fragile. Apex intentionally reinforced critical areas after weight reduction was complete, resulting in a stronger inner lip design and higher load capacity. Every Sprint wheel undergoes independent testing at STL, an Ohio-based laboratory, using testing parameters that exceed standard JWL requirements for impact resistance, load capacity, and durability.
Maximum Brake Clearance
Designed using years of brake clearance development and extensive 3D scanning, the EC-7RS features a high-clearance barrel profile and application-specific spoke designs that accommodate many large factory and aftermarket brake packages without requiring larger wheel diameters.
Enhanced Tire Retention
The EC-7RS features paintless knurled bead seats that maintain their sharp profile over time. This helps reduce tire slippage under hard acceleration and braking, improving balance retention and delivering more consistent performance during demanding track sessions.
Fitment
- BMW Applications Utilizing 5x120 Bolt Pattern and 72.56mm Center Bore
- Verify Brake Clearance, Suspension Clearance, and Tire Fitment Prior to Installation
FAQs
Does the EC-7RS clear big brake kits?
Yes. The EC-7RS was specifically engineered with a high-clearance barrel profile and application-specific spoke designs to maximize brake clearance for performance braking systems.
Can I use OEM TPMS sensors and factory mounting hardware?
Yes. The EC-7RS is compatible with OEM and aftermarket TPMS sensors, factory mounting hardware, wheel locks, stud conversion kits, and most wheel spacers.
Why Buy from Beefcake Racing?
When you're investing in premium forged wheels, you want expert support before and after the sale. Beefcake Racing has built its reputation by helping enthusiasts select the right performance parts for their specific goals. Whether you're building a dedicated track machine or upgrading your street car, our team is here to help.
Contact Beefcake Racing today:
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
