Apex EC-7 18x9.5 Flow-Formed Wheel 5x120 BP / ET58 / 72.56mm CB - Anthracite (BMW) (EC71895ET58-5120-7256-AN)
The Apex EC-7 has become one of the most respected performance wheels among BMW enthusiasts thanks to its combination of lightweight construction, exceptional durability, and race-proven engineering. Utilizing Apex's advanced flow-forming process, this 18x9.5 inch wheel delivers impressive strength and stiffness while maintaining a lightweight design that enhances acceleration, braking, and overall vehicle responsiveness.
Finished in a sophisticated Anthracite finish, this EC-7 is specifically engineered for BMW applications utilizing a 5x120 bolt pattern and 72.56mm center bore. Designed to provide exceptional brake clearance, optimized fitment, and long-term durability, it is equally suited for street performance, autocross competition, and demanding track-day use.
Specifications
- Part Number: EC71895ET58-5120-7256-AN
- Wheel Model: EC-7
- Construction: Flow-Formed
- Diameter: 18 inches
- Width: 9.5 inches
- Bolt Pattern: 5x120
- Offset: ET58
- Center Bore: 72.56mm
- Finish: Anthracite
- Approximate Weight: 21.8 lbs
- Face Profile: Profile 1
- One-Piece Wheel Construction
- Hub Centric Design
- TPMS Compatible
- OEM Center Cap Compatible
- Compatible with OEM and Aftermarket Wheel Hardware
- JWL Tested
- VIA Certified
Features
- Flow-formed construction improves barrel strength while reducing overall weight.
- Enhanced aluminum grain structure increases stiffness and durability.
- Engineered with substantial brake clearance for many OEM and aftermarket brake systems.
- Three unique concavity profiles maximize appearance and fitment flexibility.
- Finite Element Analysis optimized design strategically reinforces high-stress areas.
- Lightweight construction improves handling, braking, and steering response.
- Oversized lug pockets accommodate race lugs and impact sockets.
- Multi-stage liquid paint finish over a powder coated base coat.
- Critical mounting surfaces remain uncoated for proper wheel seating and torque retention.
- Meets or exceeds JWL load-rating requirements.
- Independently tested and certified through VIA standards.
- Hub-centric design minimizes the need for centering rings.
- Compatible with OEM and aftermarket TPMS sensors.
- Works with factory wheel hardware, wheel locks, stud conversion kits, and most wheel spacers.
- Includes Apex center cap and accepts compatible OEM BMW center caps.
Lightweight Strength for BMW Performance Applications
The EC-7 was developed to provide enthusiasts with a wheel capable of handling the demands of modern performance driving without sacrificing durability. Through extensive laser scanning, brake-fitment testing, and engineering analysis, Apex created a wheel that accommodates many large brake packages while preserving the advantages of an 18 inch wheel setup.
Advanced Finite Element Analysis allowed Apex engineers to strategically optimize material placement throughout the wheel structure. High-stress areas were reinforced while unnecessary mass was removed, resulting in a wheel that delivers exceptional rigidity and strength while remaining lightweight enough to improve overall vehicle dynamics.
Premium Finish and Precision Manufacturing
Each EC-7 receives a durable multi-stage Anthracite finish applied over a powder coated base coat. Critical mounting pads, center bores, and lug seats remain free from excess coating to ensure proper fitment, accurate torque values, and long-term reliability. Combined with its BMW-specific hub-centric design, the EC-7 delivers the precision fit and performance enthusiasts expect.
Fitment
- BMW Applications Utilizing 5x120 Bolt Pattern and 72.56mm Center Bore
- Hub Centric BMW Fitment Design
- Verify Brake Clearance, Suspension Clearance, Wheel Spacer Requirements, and Tire Fitment Prior to Installation
FAQs
Is the EC-7 suitable for track-day use?
Yes. The EC-7 was engineered with performance driving in mind and is widely used for autocross, HPDE events, track days, and aggressive street driving.
Can factory TPMS sensors and wheel hardware be reused?
Yes. The EC-7 accepts OEM and aftermarket TPMS sensors and works with factory wheel hardware, wheel locks, and most stud conversion kits.
Why Buy from Beefcake Racing?
At Beefcake Racing, we understand that selecting the right wheel involves much more than appearance. Proper offset, brake clearance, tire sizing, and suspension compatibility all play a role in achieving optimal performance. Our team works directly with enthusiasts to ensure every component fits and performs as intended.
Whether you're upgrading a daily-driven BMW or building a dedicated track machine, we're here to help with expert guidance and unmatched customer support.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
