Apex EC-7 18x9.5 Flow-Formed Wheel 5x114.3 BP / ET38 / 56.1mm CB - Satin Bronze (Subaru WRX) (EC71895ET38-51143-561-SBZ)
The Apex EC-7 is engineered for Subaru WRX enthusiasts who want a lightweight, track-capable wheel without stepping up to the cost of a fully forged design. Utilizing advanced flow-forming technology, the EC-7 delivers exceptional strength, reduced weight, and the durability required for everything from daily driving to autocross and demanding track sessions.
Finished in a striking Satin Bronze finish, this 18x9.5 inch wheel combines aggressive motorsport styling with proven performance engineering. Designed specifically for Subaru applications utilizing a 5x114.3 bolt pattern and 56.1mm center bore, the EC-7 provides outstanding brake clearance, optimized concavity, and the fitment precision that performance-focused drivers demand.
Specifications
- Part Number: EC71895ET38-51143-561-SBZ
- Wheel Model: EC-7
- Construction: Flow-Formed
- Diameter: 18 inches
- Width: 9.5 inches
- Bolt Pattern: 5x114.3
- Offset: ET38
- Center Bore: 56.1mm
- Finish: Satin Bronze
- Approximate Weight: 21.5 lbs
- Wheel Structure: One Piece
- Hub Centric Design
- TPMS Compatible
- OEM Center Cap Compatible
- Compatible with OEM and Aftermarket Wheel Hardware
- JWL Tested
- VIA Certified
Features
- Flow-formed construction improves strength while minimizing weight.
- Enhanced barrel grain structure increases stiffness and impact resistance.
- Designed to clear many large OEM and aftermarket brake systems.
- Three unique concavity profiles optimize brake clearance and visual appeal.
- Finite Element Analysis optimized design maximizes strength while reducing unnecessary mass.
- Lightweight construction helps improve acceleration, braking, and handling response.
- Oversized lug pockets accommodate race lugs and impact sockets.
- Multi-stage liquid paint finish over a durable powder coated base coat.
- Mounting surfaces remain uncoated for proper wheel seating and torque accuracy.
- Meets or exceeds JWL load-rating requirements.
- Independently tested and certified through VIA standards.
- Hub-centric design minimizes the need for centering rings.
- Compatible with OEM and aftermarket TPMS sensors.
- Works with factory wheel hardware, wheel locks, stud conversion kits, and most wheel spacers.
- Includes Apex center cap and supports compatible OEM center caps.
Built to Handle Serious Performance
The EC-7 was developed to give enthusiasts a wheel capable of handling the demands of modern performance driving. Through extensive laser scanning, brake-fitment testing, and engineering analysis, Apex created a design that clears many large brake packages while retaining the advantages of an 18 inch wheel setup. This allows drivers to maximize both braking performance and overall vehicle dynamics.
Advanced Finite Element Analysis was used throughout the development process to identify high-stress areas and optimize material placement. The result is a wheel that delivers impressive stiffness and durability while maintaining a lightweight design that enhances vehicle responsiveness on both the street and track.
Premium Finish and Precision Fitment
Every EC-7 receives a durable multi-stage Satin Bronze finish applied over a powder coated base coat. Critical mounting surfaces, center bores, and lug seats remain free from excess coating to help ensure proper fitment, accurate torque values, and long-term reliability. Combined with its hub-centric Subaru-specific design, the EC-7 delivers the confidence enthusiasts expect from a premium performance wheel.
Fitment
- Subaru WRX Applications Utilizing 5x114.3 Bolt Pattern and 56.1mm Center Bore
- Hub Centric Subaru Fitment Design
- Verify Brake Clearance, Suspension Clearance, Wheel Spacer Requirements, and Tire Fitment Prior to Installation
FAQs
Why is flow-forming beneficial compared to traditional cast wheels?
Flow-forming strengthens the barrel by improving the aluminum grain structure, resulting in a lighter and stronger wheel compared to many conventional cast wheel designs.
Will this wheel work with factory TPMS sensors?
Yes. The EC-7 accepts both OEM and aftermarket TPMS sensors along with standard-fit valve stems.
Why Buy from Beefcake Racing?
At Beefcake Racing, we know that choosing the right wheel involves much more than selecting a style. Offset, tire sizing, brake clearance, suspension setup, and intended use all impact performance and fitment. Our team helps enthusiasts make informed decisions so their setup performs exactly as intended.
Whether you're building a canyon carver, autocross competitor, or track-focused WRX, we're here to help every step of the way.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
