aFe Momentum GT Cold Air Intake System w/ Pro DRY S Filter (50-70123D) - 2024-2025 Jeep Wrangler JL 4xe 2.0L Turbo
Improve airflow and performance in your 2024-2025 Jeep Wrangler JL 4xe with the aFe POWER Momentum GT Cold Air Intake System. Designed specifically for the 2.0L turbocharged hybrid powertrain, this intake features a large oil-free Pro DRY S performance air filter, sealed roto-molded housing, and CAD-designed intake tube. Dyno testing has demonstrated gains of up to 13 horsepower and 14 lb-ft of torque.
The Momentum GT outflows the factory intake system by 12%, delivering a measured airflow rate of 240 CFM at 7" H2O. Its sealed housing retains the factory intake's water fording height, while the built-in sight window and unique filter-to-housing interface simplify maintenance and installation.
Dyno-Proven Performance Gains
Engineered to increase airflow to the Wrangler 4xe's 2.0L turbocharged engine, the Momentum GT delivers dyno-proven gains of up to 13 horsepower and 14 lb-ft of torque. The system increases airflow by 12% compared to the factory intake.
- Horsepower Gain: Up to 13 HP
- Torque Gain: Up to 14 lb-ft
- Airflow Increase: 12% over factory
- Measured Airflow: 240 CFM at 7" H2O
Large Three-Layer Pro DRY S Performance Air Filter
The Momentum GT features a large performance air filter designed to maximize available filtration surface area and airflow. Measuring 8 inches tall with a 5-inch round flange, the filter features an inverted top for additional surface area.
Its oil-free Pro DRY S media consists of three layers of progressively finer porosity synthetic material, providing effective filtration without requiring filter oil. This design offers convenient maintenance while maintaining airflow and filtration performance.
The unique filter-to-housing interface accommodates the large filter while simplifying installation and increasing available air volume. The gray Pro DRY S air filter is washable and reusable.
One-Piece Sealed Housing with Sight Window
A custom computer-designed, one-piece roto-molded housing reduces the number of intake components and is engineered to help provide a cool intake air charge. Constructed from heat-soak-resistant cross-linked polyethylene (XLPE), the sealed housing helps protect the filter from engine compartment heat.
The housing is specifically designed to retain the same water fording height as the factory intake system while improving airflow and protection.
A built-in clear sight window allows convenient inspection of the air filter without removing or disassembling the airbox.
CAD-Designed Roto-Molded Intake Tube
The Momentum GT includes a CAD-designed, dyno-tuned roto-molded intake tube engineered for increased performance and precise vehicle fitment.
Built-in resonance chambers help suppress unwanted intake noise, providing improved airflow while maintaining controlled intake sound.
Premium Stainless-Steel Hardware
Premium stainless-steel clamps provide durable, corrosion-resistant connections. The Momentum GT is designed with fewer components to simplify installation while maintaining a secure fit.
Easy Installation Without Cutting or Drilling
This intake system is engineered for installation without cutting or drilling factory components. Its unique filter-to-housing interface, included mounting hardware, and vehicle-specific design help simplify the installation process.
No ECU tuning is required.
Features
- Dyno-proven gains of up to 13 horsepower and 14 lb-ft of torque
- Outflows the factory intake system by 12%
- Measured airflow of 240 CFM at 7" H2O
- Designed specifically for the 2024-2025 Jeep Wrangler JL 4xe hybrid
- Large Pro DRY S performance air filter with three layers of oil-free synthetic media
- 5-inch round filter flange and 8-inch filter height
- Inverted filter top increases available filtration surface area
- Washable and reusable gray air filter
- No filter oil required for maintenance
- Unique filter-to-housing interface accommodates a large filter and simplifies installation
- One-piece sealed roto-molded housing
- Heat-soak-resistant XLPE housing construction
- Retains the factory intake system's water fording height
- Built-in clear sight window for filter inspection without disassembly
- CAD-designed and dyno-tuned roto-molded intake tube
- Built-in resonance chambers help suppress unwanted intake noise
- Premium corrosion-resistant stainless-steel clamps
- Closed airbox design with heat shield included
- No cutting or drilling of factory components required
- Mounting hardware included
- No ECU tuning required
Specifications
- Brand: aFe POWER
- Product Series: Momentum GT
- Part Number: 50-70123D
- Product Type: Cold Air Intake System
- Filter Media: Pro DRY S
- Filter Material: Non-Woven Synthetic
- Filter Construction: Three-Layer Oil-Free Synthetic Media
- Filter Color: Gray
- Filter Flange Diameter: 5 Inches
- Filter Height: 8 Inches
- Filter Design: Inverted Top
- Airbox Type: Closed
- Housing Construction: One-Piece Roto-Molded XLPE
- Intake Tube: CAD-Designed Roto-Molded Tube with Resonance Chambers
- Horsepower Increase: Up to 13 HP
- Torque Increase: Up to 14 lb-ft
- Airflow Gain: 12%
- Airflow Rate: 240 CFM at 7" H2O
- Replacement Air Filter: 21-91126
- Compatible Pre-Filter: 28-10283
- Heat Shield Included: Yes
- Mounting Hardware Included: Yes
- ECU Tuning Required: No
Fitment
- 2024 Jeep Wrangler JL 4xe 2.0L Turbocharged Hybrid
- 2025 Jeep Wrangler JL 4xe 2.0L Turbocharged Hybrid
Important Fitment Note: This intake system ONLY fits Jeep Wrangler JL 4xe hybrid models. It does not fit standard gasoline-powered Wrangler models due to a permanently mounted valve on the factory intake tube. Inspect the stock intake tube before purchasing to verify compatibility.
Filter Maintenance
The Pro DRY S performance air filter is washable and reusable. Follow aFe POWER's recommended cleaning procedures to maintain proper filtration and airflow performance. The oil-free synthetic media does not require re-oiling after cleaning.
The built-in housing sight window allows visual inspection of the filter without removing the airbox.
Replacement Air Filter: aFe POWER 21-91126
Compatible Pre-Filter: aFe POWER 28-10283
Patented Design
This product is covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, and 11745129.
Installation Note: This system includes mounting hardware and installs without cutting or drilling factory components. No ECU tuning is required.
Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
