aFe POWER Momentum GT Cold Air Intake System w/ Pro DRY S Filter (50-70117D) - 2024-2026 Mustang GT & Dark Horse
Improve airflow and performance in your 2024-2026 Ford Mustang GT or Dark Horse with the aFe POWER Momentum GT Cold Air Intake System. Designed for the 5.0L V8 engine, this intake delivers dyno-proven gains of up to 8 horsepower and 8 lb-ft of torque while increasing airflow by up to 10% over the factory intake system.
The Momentum GT features dual sealed air filter housings, large 360-degree radial-flow Pro DRY S air filters, and computer-designed intake tubing to maximize airflow while reducing heat soak. Its oil-free synthetic filter media provides convenient maintenance, while the direct-fit design allows installation without vehicle modifications or ECU tuning.
Dyno-Proven Performance Gains
The aFe POWER Momentum GT Cold Air Intake is engineered to improve airflow and engine performance throughout the RPM range.
- Maximum Horsepower Gain: +8 HP
- Maximum Torque Gain: +8 lb-ft
- Maximum Airflow Increase: 10% Over Factory Intake
By improving intake airflow and reducing exposure to engine compartment heat, the Momentum GT is designed to deliver improved throttle response, horsepower, and torque.
Pro DRY S Oil-Free Air Filters
The Momentum GT system features large 360-degree radial-flow air filters utilizing aFe POWER Pro DRY S media.
Each filter incorporates three layers of oil-free synthetic media designed to provide excellent filtration efficiency and dust holding capacity while maintaining high airflow.
Unlike oiled filter media, Pro DRY S filters require no oil during maintenance. The washable and reusable design makes them ideal for daily drivers, commuters, and light off-road applications where convenient maintenance is a priority.
When cleaning is required, the filters can be serviced according to aFe POWER's cleaning instructions without the need for filter oil.
Dual Sealed Air Filter Housings
The Momentum GT intake utilizes dual sealed air filter housings constructed from heat-resistant cross-linked polyethylene (XLPE).
The enclosed design helps isolate the air filters from hot engine compartment air and contaminants, promoting cooler, denser airflow into the engine.
A patent-pending filter-to-housing interface reduces the number of components required for assembly, simplifying installation while maintaining a secure connection.
Built-In Filter Inspection Windows
Each sealed housing incorporates a clear sight window that allows the air filter to be inspected without removing the housing.
This convenient design makes it easier to monitor filter condition and determine when cleaning is necessary.
Dyno-Tuned XLPE Intake Tubing
The Momentum GT system features computer-designed, dyno-tuned intake tubing engineered to provide efficient airflow while maintaining precise vehicle fitment.
Constructed from durable, heat-resistant XLPE material, the intake tubing helps reduce heat soak while directing airflow efficiently toward the engine.
The tubing design is optimized to support the system's horsepower and torque improvements.
Direct-Fit Installation
The Momentum GT Cold Air Intake is designed for straightforward installation using factory mounting locations without vehicle modifications.
Its patent-pending filter interface and reduced component count help simplify assembly. Stainless steel clamps and reinforced silicone couplings provide durable, secure connections throughout the intake system.
Billet aluminum fittings are included to allow factory connections to transfer to the new intake system.
No ECU tuning is required for installation.
Features
- Designed for 2024-2026 Ford Mustang GT and Dark Horse 5.0L V8 applications
- Momentum GT sealed cold air intake system
- Dyno-proven gains of up to 8 horsepower and 8 lb-ft of torque
- Increases airflow by up to 10% compared to the factory intake
- Designed to improve throttle response and engine performance
- Dual sealed air filter housings help reduce exposure to engine compartment heat
- Heat-resistant XLPE housing construction
- Large 360-degree radial-flow air filters
- Pro DRY S oil-free synthetic filter media
- Three layers of synthetic filtration media
- Washable and reusable filters
- No filter oil required during maintenance
- Excellent filtration efficiency and dust holding capacity
- Ideal for daily driving, commuting, and light off-road use
- Built-in clear sight windows for convenient filter inspection
- Patent-pending filter-to-housing interface simplifies installation
- Computer-designed and dyno-tuned intake tubing
- Heat-resistant XLPE intake tube construction
- Designed to minimize heat soak and promote efficient airflow
- Stainless steel clamps included
- Reinforced silicone couplings included
- Billet aluminum fittings allow factory connections to transfer over
- Reduced component count for straightforward installation
- Direct-fit design without vehicle modifications
- No ECU tuning required
- Mounting hardware included
Specifications
- Manufacturer: aFe POWER
- Product Series: Momentum GT
- Part Number: 50-70117D
- Product Type: Cold Air Intake System
- Maximum Horsepower Gain: +8 HP
- Maximum Torque Gain: +8 lb-ft
- Maximum Airflow Gain: 10%
- Air Box Type: Closed / Sealed
- Housing Configuration: Dual Sealed Housings
- Housing Material: Heat-Resistant XLPE
- Heat Shield Included: Yes
- Filter Media: Pro DRY S
- Filter Material: Non-Woven Synthetic
- Filter Media Layers: 3
- Filter Design: 360-Degree Radial-Flow
- Filter Color: Gray
- Filter Oil Required: No
- Washable and Reusable: Yes
- Intake Tube Material: XLPE
- Intake Tube Design: Computer-Designed, Dyno-Tuned
- Filter Inspection Windows: Included
- Clamps: Stainless Steel
- Couplings: Reinforced Silicone
- Connection Fittings: Billet Aluminum
- Mounting Hardware Included: Yes
- ECU Tuning Required: No
- Replacement Air Filter Part Number: 21-91093
- Pre-Filter Part Number: 28-10153
Fitment
- 2024 Ford Mustang GT 5.0L V8
- 2025 Ford Mustang GT 5.0L V8
- 2026 Ford Mustang GT 5.0L V8
- 2024 Ford Mustang Dark Horse 5.0L V8
- 2025 Ford Mustang Dark Horse 5.0L V8
- 2026 Ford Mustang Dark Horse 5.0L V8
Installation and Maintenance Notes
Installation: The Momentum GT intake is designed for direct-fit installation without vehicle modifications. Stainless steel clamps, reinforced silicone couplings, billet aluminum fittings, and mounting hardware are included.
ECU Tuning: No ECU tuning is required.
Filter Maintenance: Pro DRY S filters are washable and reusable. Follow aFe POWER's cleaning instructions. No filter oil is required.
Replacement Air Filter: aFe POWER part number 21-91093.
Pre-Filter: aFe POWER part number 28-10153.
Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
