aFe Momentum GT Cold Air Intake System w/ Pro DRY S Filter (50-70116D) - 2024-2026 Ford Ranger Raptor 3.0L EcoBoost
Increase airflow and improve performance in your 2024-2026 Ford Ranger Raptor 3.0L twin-turbo EcoBoost V6 with the aFe POWER Momentum GT Cold Air Intake System. Featuring a washable and reusable, oil-free Pro DRY S air filter, sealed XLPE housing, and dyno-tuned intake tubes, this system delivers dyno-proven gains of up to 18 horsepower and 19 lb-ft of torque.
Engineered to outflow the factory intake system by 11%, the Momentum GT delivers a measured airflow rate of 355 CFM at 7 inches of water. Its patented filter-to-housing interface, clear inspection window, and factory mounting compatibility provide improved airflow with straightforward installation and convenient maintenance.
Dyno-Proven Performance Gains
The aFe Momentum GT Cold Air Intake System is designed to improve airflow to the Ranger Raptor's 3.0L twin-turbo EcoBoost engine. Dyno testing has demonstrated gains of up to 18 horsepower and 19 lb-ft of torque, along with an 11% increase in airflow compared to the factory intake system.
- Horsepower Gain: Up to 18 HP
- Torque Gain: Up to 19 lb-ft
- Airflow Increase: 11% over factory
- Measured Airflow: 355 CFM at 7" H2O
Large Three-Layer Pro DRY S Performance Air Filter
This Momentum GT intake features a large 360-degree radial flow air filter with aFe's oil-free Pro DRY S media. Constructed with three progressively layered sheets of non-woven synthetic material, the filter provides effective filtration efficiency and dust-holding capacity without requiring filter oil.
The Pro DRY S media is particularly well suited for street driving and light off-road use. Its inverted filter top increases the available filtration surface area, helping extend service intervals.
The gray Pro DRY S filter is washable and reusable, allowing convenient maintenance without the need for re-oiling.
Unique One-Piece Sealed Housing
The Momentum GT features a smooth, one-piece sealed housing constructed from heat-resistant cross-linked polyethylene (XLPE). Its patented filter-to-housing interface reduces the total number of components required for installation while providing a secure connection between the filter and housing.
A large, clear sight window allows convenient inspection of the air filter without disassembling the intake system. The housing also incorporates the factory air inlet scoop.
Dyno-Tuned XLPE Intake Tubes
Computer-designed and dyno-tuned intake tubes are engineered to maximize power gains while maintaining precise vehicle fitment. Constructed from durable, heat-soak-resistant XLPE, the intake tubes are designed to withstand demanding engine compartment conditions.
Premium Clamps and Silicone Couplings
Stainless-steel clamps provide strong, secure connections, while premium silicone couplings offer flexibility and reliable sealing. The Momentum GT system uses fewer components to simplify installation without compromising fitment.
Easy Installation and Maintenance
This cold air intake utilizes factory mounting locations for a secure, straightforward installation. The one-piece housing, patented filter interface, and included mounting hardware help minimize installation complexity.
The clear housing window makes routine filter inspection easy, while the washable and reusable Pro DRY S filter can be cleaned without requiring filter oil. No ECU tuning is required.
Features
- Dyno-proven gains of up to 18 horsepower and 19 lb-ft of torque
- Outflows the factory intake system by 11%
- Measured airflow of 355 CFM at 7" H2O
- Large 360-degree radial flow Pro DRY S performance air filter
- Three progressively layered sheets of oil-free synthetic filter media
- Washable and reusable gray air filter
- No filter oil required for maintenance
- Progressive filter layering provides filtration efficiency and dust-holding capacity
- Inverted filter top increases filtration surface area and helps extend service intervals
- Pro DRY S media designed for street and light off-road applications
- One-piece sealed housing constructed from heat-resistant XLPE
- Patented filter-to-housing interface simplifies installation
- Large clear sight window allows filter inspection without disassembly
- Housing incorporates the factory air inlet scoop
- Computer-designed, dyno-tuned XLPE intake tubes
- Heat-soak-resistant and durable intake tube construction
- Premium stainless-steel clamps for secure connections
- Flexible silicone couplings provide a reliable seal
- Uses factory mounting locations for straightforward installation
- Mounting hardware included
- No ECU tuning required
Specifications
- Brand: aFe POWER
- Product Series: Momentum GT
- Part Number: 50-70116D
- Product Type: Cold Air Intake System
- Filter Media: Pro DRY S
- Filter Material: Non-Woven Synthetic
- Filter Construction: Three-Layer Oil-Free Synthetic Media
- Filter Design: 360-Degree Radial Flow with Inverted Top
- Filter Color: Gray
- Filter Serviceability: Washable and Reusable
- Filter Oil Required: No
- Housing Material: Cross-Linked Polyethylene (XLPE)
- Intake Tube Material: Cross-Linked Polyethylene (XLPE)
- Horsepower Increase: Up to 18 HP
- Torque Increase: Up to 19 lb-ft
- Airflow Gain: 11%
- Airflow Rate: 355 CFM at 7" H2O
- Replacement Air Filter: 20-91206D
- Compatible Pre-Filter: 28-10043
- Mounting Hardware Included: Yes
- ECU Tuning Required: No
Fitment
- 2024 Ford Ranger Raptor 3.0L Twin-Turbo EcoBoost V6
- 2025 Ford Ranger Raptor 3.0L Twin-Turbo EcoBoost V6
- 2026 Ford Ranger Raptor 3.0L Twin-Turbo EcoBoost V6
Filter Maintenance
The included Pro DRY S air filter is washable and reusable. Follow aFe POWER's recommended cleaning procedures to maintain proper filtration and airflow performance. The oil-free synthetic media does not require re-oiling after cleaning.
The filter can be visually inspected through the clear housing window without disassembling the intake system.
Replacement Air Filter: aFe POWER 20-91206D
Compatible Pre-Filter: aFe POWER 28-10043
Patented Design
This product is covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, and 11745129.
Installation Note: This intake system uses factory mounting locations and includes mounting hardware. No ECU tuning is required.
Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
