aFe Power Vulcan Series 3-Inch to 3.5-Inch Stainless Steel Cat-Back Exhaust System Polished (49-33151-P) - 2021-2026 Ford F-150 Raptor / 2023-2026 Raptor R
Upgrade the sound and performance of your Ford F-150 Raptor or Raptor R with the aFe Power Vulcan Series Cat-Back Exhaust System. Constructed from 3-inch to 3.5-inch mandrel-bent 304 stainless steel tubing, this system delivers a powerful exhaust note while offering performance gains of up to 9 horsepower and 12 lb-ft of torque.
Designed for the 2021-2026 F-150 Raptor 3.5L EcoBoost and 2023-2026 Raptor R 5.2L Supercharged V8, the Vulcan Series exhaust features an integrated mitered merge X-pipe, acoustically tuned expansion chamber, factory-style exhaust valve integration, and dual 4.5-inch polished stainless steel exhaust tips. Its direct bolt-on design utilizes factory-style flanges and hangers for installation without cutting or permanent modifications.
3-Inch to 3.5-Inch 304 Stainless Steel Construction
The Vulcan Series cat-back exhaust is manufactured from 3-inch to 3.5-inch mandrel-bent 304 stainless steel tubing for strength, durability, and consistent exhaust flow. The system is 100% MIG-welded for race-proven construction and long-term reliability.
Acoustically Tuned Exhaust Sound
An acoustically tuned expansion chamber produces a deep, powerful exhaust tone suited to the performance capabilities of the Raptor and Raptor R. The system is designed to enhance exhaust sound while allowing the engine to deliver its available horsepower and torque.
Integrated Mitered Merge X-Pipe
The integrated mitered merge X-pipe balances and evenly distributes exhaust pulses traveling through the system. This design helps maximize exhaust scavenging while minimizing unwanted exhaust drone.
Factory-Style Exhaust Valve Integration
The Vulcan Series exhaust incorporates factory-style exhaust valves designed to operate using the vehicle's original exhaust valve motors. These valves regulate exhaust gas flow by opening, closing, or partially restricting the exhaust passageways based on throttle position to support performance and sound control.
Note: Factory exhaust valve motors are not included. The system is designed to reuse the original motors.
Dual 4.5-Inch Polished Stainless Steel Exhaust Tips
Completing the system are dual 4.5-inch diameter polished 304 stainless steel clamp-on exhaust tips. Each tip features a riveted aFe Power logo plate for a distinctive appearance.
Direct Bolt-On Installation
Designed using computer-aided technology for precise vehicle fitment, the Vulcan Series exhaust utilizes factory-style flanges and hangers for secure mounting. The direct bolt-on configuration requires no cutting or permanent vehicle modifications.
aFe Power exhaust systems are engineered and manufactured at the company's facility in Corona, California.
Features
- Performance gains of up to 9 horsepower and 12 lb-ft of torque
- Vulcan Series cat-back exhaust system
- 3-inch to 3.5-inch mandrel-bent 304 stainless steel tubing
- 100% MIG-welded construction for strength and durability
- Acoustically tuned expansion chamber for a deep exhaust tone
- Integrated mitered merge X-pipe
- Balances exhaust pulses to improve scavenging and minimize drone
- Factory-style exhaust valves for exhaust flow and sound control
- Designed to reuse factory exhaust valve motors
- Dual 4.5-inch diameter polished 304 stainless steel exhaust tips
- Clamp-on exhaust tips with riveted aFe Power logo plates
- Factory-style flanges and hangers for secure mounting
- Direct bolt-on installation with no cutting or permanent modifications required
- Computer-aided design for precise vehicle fitment
- Engineered and manufactured in Corona, California
- Does not require a CARB Executive Order number
Specifications
- Brand: aFe Power
- Series: Vulcan
- Part Number: 49-33151-P
- Exhaust Type: Cat-Back
- Tubing Diameter: 3 Inches to 3.5 Inches
- Tubing Material: 304 Stainless Steel
- Tubing Construction: Mandrel-Bent
- Weld Construction: 100% MIG-Welded
- Exhaust Tip Quantity: 2
- Exhaust Tip Diameter: 4.5 Inches
- Exhaust Tip Material: 304 Stainless Steel
- Exhaust Tip Finish: Polished
- Exhaust Tip Attachment: Clamp-On
- X-Pipe Design: Integrated Mitered Merge
- Exhaust Valves: Factory-Style, Reuses Original Valve Motors
- Installation: Direct Bolt-On
Fitment
- 2021 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2022 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2023 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2024 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2025 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2026 Ford F-150 Raptor 3.5L Twin-Turbo EcoBoost V6
- 2023 Ford F-150 Raptor R 5.2L Supercharged V8
- 2024 Ford F-150 Raptor R 5.2L Supercharged V8
- 2025 Ford F-150 Raptor R 5.2L Supercharged V8
- 2026 Ford F-150 Raptor R 5.2L Supercharged V8
Installation Note: This system utilizes factory-style flanges and hangers for direct bolt-on installation without cutting or permanent modifications.
Exhaust Valve Note: Factory exhaust valve motors are required for valve operation and are not included with this exhaust system. The original valve motors must be reused.
Emissions Disclaimer: This product does not require a CARB EO number.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
