aFe Control Sway-A-Way 2.5 Rear Remote Reservoir Coilover Kit with Compression Adjusters (302-0056-13-CA) - 2021-2026 Ford Bronco
Upgrade the rear suspension of your 2021-2026 Ford Bronco with the aFe Control Sway-A-Way 2.5 Rear Remote Reservoir Coilover Kit with Compression Adjusters. Designed as a direct-fit replacement for the 6th Generation Bronco, these 2.5-inch diameter coilovers combine more than 20 years of race-proven engineering with application-specific damping for on-road comfort and off-road control.
Featuring remote reservoirs with 16-position compression adjusters, dual-rate springs, adjustable ride height, and up to 11.5 inches of wheel travel, these coilovers provide suspension tuning for different terrain and load conditions. The kit installs without vehicle modifications and is designed to work with the factory rear control arms.
Extended Rear Suspension Travel
The Sway-A-Way rear coilovers are engineered to provide up to 11.5 inches of wheel travel while retaining compatibility with the factory rear control arms. Their application-specific design allows increased suspension articulation without binding suspension joints or overextending the brake lines.
Note: A track bar relocation bracket is recommended when adjusting rear lift height above 2.0 inches.
Adjustable Ride Height
These rear coilovers provide an adjustable lift range of 1.0 to 3.0 inches, allowing ride height to be tailored to the vehicle and intended use. The kit comes preset for approximately 2.0 inches of lift and includes a spanner wrench for adjustment.
Actual lift height varies depending on Bronco trim and configuration. The manufacturer's 2.0-inch preset lift measurement was established using a 2023 four-door Bronco Badlands equipped with the 2.7L EcoBoost V6.
Dual-Rate Coil Springs
The included dual-rate springs are designed to balance ride comfort with load-carrying capacity. This spring configuration supports controlled suspension movement across varying driving conditions while maintaining the capability needed for off-road use.
Remote Reservoirs with 16-Position Compression Adjusters
The Sway-A-Way 2.5 Series Mid-Speed Compression Adjusters mount directly into the remote reservoirs, providing 16 clicks of compression damping adjustment. The adjusters allow the suspension to transition from a fully open, unrestricted soft setting to a fully closed, firm setting, offering up to a 200% increase in damping force.
Adjustment is accomplished in just two full turns of the GF polymer adjuster knob. Rebound damping remains unaffected by compression adjuster settings, allowing compression characteristics to be changed independently.
The adjuster housings are manufactured from billet 6061-T6 aluminum with a red anodized, laser-etched finish for corrosion resistance. Internally, CNC-machined 7075-T6 aluminum metering pistons provide durability for high-speed applications.
These adjusters are particularly useful for Broncos that frequently carry varying loads or operate across different terrain conditions, allowing quick changes to compression damping without disassembling the suspension.
Premium Materials and Corrosion Protection
Sway-A-Way rear coilovers are designed and built in the USA using high-strength steel cylinders with a two-step zinc-plated finish. This coating has been salt-spray tested for resistance to harsh environments.
External CNC-machined aluminum components feature a red anodized finish for additional corrosion protection, while 7/8-inch polished Nitro Steel shafts provide strength and durability.
Multi-Seal Carrier and Synthetic Shock Oil
The multi-seal carrier incorporates redundant seals to prevent dirt and debris from entering the shock while retaining the specially formulated 7wt fully synthetic shock oil. Viton O-rings provide reliable sealing across extreme operating temperatures.
Rebuildable and Revalveable Design
Sway-A-Way shocks are designed to be rebuilt and revalved by a trained professional. Seal kits, replacement parts, and valve shims are available through aFeControl.com, allowing the suspension to be serviced and tuned over time.
Direct-fit Sway-A-Way shocks also include warranty protection against manufacturer defects.
Direct-Fit Installation
This rear coilover kit is designed as a direct-fit replacement for the 2021-2026 Ford Bronco and requires no vehicle modifications. Application-specific damping curves are engineered to maintain on-road comfort while providing off-road suspension control.
This aFe Control suspension product is designed and engineered at the company's facility in Corona, California.
Features
- Direct-fit rear coilover kit for 2021-2026 Ford Bronco
- 2.5-inch diameter Sway-A-Way performance coilovers
- Remote reservoirs with integrated mid-speed compression adjusters
- 16 clicks of compression damping adjustment
- Up to 200% increase in compression damping force
- Two full turns between fully open and fully closed adjuster settings
- Compression adjustment does not affect rebound damping
- Dual-rate springs for ride comfort and load-carrying capacity
- Adjustable rear lift height from 1.0 to 3.0 inches
- Preset for approximately 2.0 inches of lift
- Includes spanner wrench for ride height adjustment
- Up to 11.5 inches of wheel travel
- Designed to operate with factory rear control arms
- Application-specific damping for on-road comfort and off-road control
- 7/8-inch polished Nitro Steel shock shafts
- High-strength steel cylinders with two-step zinc-plated finish
- Salt-spray-tested corrosion protection
- Red anodized CNC-machined aluminum components
- Billet 6061-T6 aluminum compression adjuster housings
- CNC-machined 7075-T6 aluminum metering pistons
- GF polymer compression adjuster knobs
- Multi-seal carrier with redundant seals
- Viton O-rings for reliable sealing in extreme temperatures
- Specifically formulated 7wt fully synthetic shock oil
- Rebuildable and revalveable by a trained professional
- Replacement seal kits, parts, and valve shims available
- Direct-fit installation without vehicle modifications
- Designed and built in the USA
- Warranty protection against manufacturer defects
Specifications
- Brand: aFe Control
- Series: Sway-A-Way 2.5
- Part Number: 302-0056-13-CA
- Product Type: Rear Remote Reservoir Coilover Kit
- Installation Position: Rear
- Shock Diameter: 2.5 Inches
- Shock Shaft Diameter: 7/8 Inch
- Shock Shaft Material: Polished Nitro Steel
- Spring Type: Dual-Rate
- Reservoir Type: Remote
- Compression Adjusters: Mid-Speed, Reservoir-Mounted
- Compression Adjustment: 16 Clicks
- Damping Adjustment Range: Up to 200% Increase in Compression Damping
- Adjuster Housing Material: 6061-T6 Billet Aluminum
- Metering Piston Material: 7075-T6 Aluminum
- Shock Oil: 7wt Fully Synthetic
- Sealing: Multi-Seal Carrier with Viton O-Rings
- Adjustable Lift Height: 1.0 to 3.0 Inches
- Preset Lift Height: Approximately 2.0 Inches
- Maximum Wheel Travel: 11.5 Inches
- Ride Height Adjustment Tool: Spanner Wrench Included
- Rebuildable: Yes
- Revalveable: Yes
- Installation: Direct Fit
- Manufacturing: USA
Fitment
- 2021 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2022 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2023 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2024 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2025 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2026 Ford Bronco 2.3L Turbo EcoBoost Inline-4
- 2021 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
- 2022 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
- 2023 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
- 2024 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
- 2025 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
- 2026 Ford Bronco 2.7L Twin-Turbo EcoBoost V6
Fitment and Installation Notes
- Lift height may vary depending on vehicle trim level and configuration.
- The kit includes a spanner wrench for ride height adjustment.
- The manufacturer's 2.0-inch preset lift measurement was established on a 2023 four-door Bronco Badlands with the 2.7L EcoBoost V6.
- A track bar relocation bracket is recommended when adjusting rear lift height above 2.0 inches.
- Designed for direct-fit installation without vehicle modifications.
Emissions Disclaimer: This product does not require a CARB EO number.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
