Vortech Supercharger V-3 JT Complete System Polished (2018-2023 Mustang GT) 4FQ238-230JT

Vortech Superchargers continue their dominance of the Coyote market with the announcement of 50-State Emissions Legality on Ford 2018-2023 5.0L Mustang GT Complete Supercharging Systems.These exciting systems are available for both the 6-Speed MT-82 Manual and 10-Speed 10r80 Automatic Transmission vehicles, and include the higher output Vortech V-3 JT Supercharger. These self-lubricated units feature the unmatched efficiency and reliability you have come to expect from a Vortech Supercharger, plus the ability to support up to 1,000 horsepower in your Coyote-powered Mustang.

The Complete Vortech System will boost your stock S550 Mustang to 692 HP and 584 lb/ft torque with 7.5-8.5 PSI from the V-3 JT-Trim Supercharger at the factory redline.

CARB Compliance
Complete systems (2018-2020 Mustangs) are 50-State smog legal per California Air Resources Board (CARB). CARB Executive Order # D-213-40

• - V-3 JT-Trim compressor with 3.60" drive pulley
• - Manifold boost pressure: 7.5-8.5 psig @ redline on stock engine
• - Supplied handheld programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
• - Fuel system upgrade includes fuel rail spacers, high flow replacement fuel injectors, and Vortech Maxflow Plug-and-Play Fuel Pump Voltage Booster.
• Air inlet assembly includes:
• - High-flow roto-molded ducting. Mates to OEM airbox and some aftermarket "CAI" MAF/inlet assemblies
• - OEM replacement K&N panel filter
• - Silicone sleeves and reducers
• - Stainless steel clamps
• - PCV and breather hose provisions
• - Replacement engine coolant pipe and hose assemblies
• - Engine coolant reservoir replacement assembly
• - Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.
• Discharge components include:
• - High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
• - Mandrel bent 3" and 3.5" aluminum charge tubes for high flow and minimal weight
• - Stainless steel clamps
• - Silicone sleeves
• - 98mm MAF housing configured for "blow-through" use. Integrated air-straightener upstream of the MAF housing.
• - Vortech Maxflow Race Bypass Valve