null

PNR Welding Complete Kit (Cadillac CTS-V)

Image is a representation of this item.
Actual item may vary.

Item#:
pnr-ctsv-sedan-complete
(No reviews yet) Write a Review

Complete half moon shaped ice tanks that sit in in trunk designed to fit the shapel. These are complete kits that are listed in stages. All these half moon tanks here will come standard with large black and clear cap, with the option to put a black/clear xlarge cap on. Note the black and clear caps have been known to crack at the clear center due to excess heat in trunk. The second option is our red/ black with clear center cap. The black/red ring cap is the best out there for sealing. It has ten mounting bolts instead of 6 like the standard one, and has outside threads. The black and red cap will not fit flush under carpet with a rule 3700 pump.

Stage 2 8 gallon with 2000 gph rule pump. This comes complete with hose and installation kit. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, grommets for hose and hardware.

Stage three 8 gallon with Davies Craig 150 pump, hose and install kit. Pump is external pump and flows very good. This kit is still budget friendly but works really well and flows great. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, grommets for hose and all hardware.

Stage four 8 gallon half moon tank with Stewart CWA400 4600rpm pump. This is the top flowing pump for the intercooler system. Comes with correct fitting size to feed the pump and still use your factory intercooler and heat exchanger. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, grommets for hose all hardware.

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov