Fuel Injector Clinic 1440cc High-Z Injector Set (is402-1440h) - 1987-2004 Mustang GT / 1993-1998 Mustang Cobra
Give your 1987-2004 Ford Mustang GT or 1993-1998 Mustang Cobra the fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1440cc High-Z injector set. This matched set of eight injectors flows 1440cc/min, or 140 lbs/hr, at 43.5 PSI fuel pressure, delivering substantial fueling capability while maintaining the precise control needed for excellent street manners. Positioned between FIC's 1200cc and 1650cc offerings, the is402-1440h combines high flow capacity with excellent linearity and short pulse width repeatability for accurate fueling from idle through high-load operation.
Fuel Injector Clinic builds the 1440cc injector with stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using FIC's proprietary Data Match Technology, with every injector individually serial numbered and documented on the supplied Data Match Sheet. The is402-1440h is available with PGTUSC8 solder-in pigtails or optional PADPUtoJ8 plug-and-play adapters, and FIC provides plug-and-play Ford ECU data to support accurate calibration.
Specifications
- Part Number: is402-1440h
- Application: 1987-2004 Ford Mustang GT / 1993-1998 Ford Mustang Cobra
- Injector Quantity: 8
- Flow Rate: 1440cc/min
- Flow Rate at 43.5 PSI: 140 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Included Connector Solution: PGTUSC8 solder-in pigtails
- Optional Connector Solution: PADPUtoJ8 plug-and-play adapters
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1440cc/min High-Z performance fuel injectors
- 140 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-impedance saturated ball and seat injector design
- Excellent idle performance for a high-flow performance injector
- Excellent linearity throughout the injector operating range
- Superior short pulse width control and repeatability
- Stainless alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Available with PGTUSC8 solder-in pigtails
- Optional PADPUtoJ8 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1440cc Fuel Capacity with Street-Friendly Control
The FIC 1440cc injector fills the performance gap between the 1200cc and 1650cc injectors, making it a strong choice for Mustang combinations that need substantial fuel capacity without immediately stepping to the larger 1650cc size. Excellent linearity and short pulse width control help tuners accurately manage fueling during idle and part-throttle operation, while 1440cc/min of flow provides the additional capacity demanded by higher-horsepower gasoline and E85 combinations.
Data Match Technology for Precise Tuning
High-flow injectors need consistency across every cylinder. Fuel Injector Clinic precisely matches each is402-1440h set using proprietary Data Match Technology. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet. Detailed flow matching and latency information gives your tuner accurate injector data for consistent cylinder-to-cylinder fuel delivery and precise calibration throughout the operating range.
Broad Fuel Compatibility
Stainless alloy valve construction gives the FIC 1440cc injector the flexibility required for a wide range of street and competition fuels. These injectors are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. That broad compatibility makes the is402-1440h a versatile fueling solution for Mustang builds whose fuel choice or performance goals may evolve over time.
Connector Options for Your Mustang
The is402-1440h is available with PGTUSC8 solder-in pigtails for the injector connector conversion. For owners who prefer installation without cutting or soldering the factory wiring harness, optional PADPUtoJ8 plug-and-play adapters provide a direct conversion between the injector and factory harness connections. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 1987 Ford Mustang GT
- 1988 Ford Mustang GT
- 1989 Ford Mustang GT
- 1990 Ford Mustang GT
- 1991 Ford Mustang GT
- 1992 Ford Mustang GT
- 1993 Ford Mustang GT
- 1993 Ford Mustang Cobra
- 1994 Ford Mustang GT
- 1994 Ford Mustang Cobra
- 1995 Ford Mustang GT
- 1995 Ford Mustang Cobra
- 1996 Ford Mustang GT
- 1996 Ford Mustang Cobra
- 1997 Ford Mustang GT
- 1997 Ford Mustang Cobra
- 1998 Ford Mustang GT
- 1998 Ford Mustang Cobra
- 1999 Ford Mustang GT
- 2000 Ford Mustang GT
- 2001 Ford Mustang GT
- 2002 Ford Mustang GT
- 2003 Ford Mustang GT
- 2004 Ford Mustang GT
Fitment Note: Fuel Injector Clinic supplies these injectors with the O-rings required for the listed factory applications. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
What connector options are available for the Fuel Injector Clinic is402-1440h?
The is402-1440h is available with PGTUSC8 solder-in pigtails. Optional PADPUtoJ8 plug-and-play adapters can be selected for installation without cutting or soldering the factory wiring harness.
What fuels can the FIC is402-1440h 1440cc injectors use?
Fuel Injector Clinic specifies the 1440cc injector for broad fuel compatibility. Its stainless alloy valve construction supports pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford Mustang performance and high-horsepower fuel-system combinations. Whether you are upgrading a Fox Body, SN95, or New Edge Mustang GT or building a performance Mustang Cobra, our experienced team can help you select injectors and supporting fuel-system components that match your combination and power goals.
Questions about Fuel Injector Clinic part number is402-1440h or your Mustang fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
