Fuel Injector Clinic 1200cc High-Z Injector Set (is402-1200h) - 1987-2004 Mustang GT / 1993-1998 Mustang Cobra
Step up the fuel delivery in your 1987-2004 Ford Mustang GT or 1993-1998 Mustang Cobra with the Fuel Injector Clinic 1200cc High-Z injector set. This matched set of eight injectors flows 1200cc/min, or 110 lbs/hr, at 43.5 PSI fuel pressure, providing the capacity needed for serious modified and high-horsepower Mustang combinations. Excellent linearity and short pulse width repeatability help maintain precise fuel control at idle and part throttle while delivering the additional volume required as engine load and horsepower increase.
Previously offered as is402-1100H, the current is402-1200h injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency results provided on the Data Match Sheet for accurate calibration. Plug-and-play fitment to the OEM wiring harness eliminates the need for an injector connector conversion, while plug-and-play Ford ECU data is available from Fuel Injector Clinic to further support the tuning process.
Specifications
- Part Number: is402-1200h
- Previous Part Number: is402-1100H
- Application: 1987-2004 Ford Mustang GT / 1993-1998 Ford Mustang Cobra
- Injector Quantity: 8
- Flow Rate: 1200cc/min
- Flow Rate at 43.5 PSI: 110 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Electrical Fitment: Plug-and-play fit to OEM harness
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1200cc/min High-Z performance fuel injectors
- 110 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-impedance saturated injector design
- Plug-and-play connection to the OEM wiring harness
- No injector connector conversion required
- Excellent linearity throughout the injector operating range
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory applications
- Current 1200cc replacement for the previous is402-1100H injector set
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1200cc Fuel Capacity for Serious Mustang Power
The FIC 1200cc injector gives performance Mustang combinations substantial fuel capacity when factory or smaller aftermarket injectors can no longer keep pace. With 1200cc/min of flow, the is402-1200h is built to meet the increasing fuel demand of high-output combinations while maintaining the precise injector behavior needed for accurate tuning. For street, strip, and high-horsepower builds, it delivers the additional fueling headroom needed to support more aggressive performance goals.
Data Match Technology for Precise Calibration
Consistent injector performance across all eight cylinders becomes increasingly important as horsepower and fuel demand rise. Fuel Injector Clinic precisely matches each is402-1200h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency information is supplied on the Data Match Sheet. This gives your tuner accurate injector-specific data for consistent cylinder-to-cylinder fueling and precise calibration throughout the operating range.
High Flow with Excellent Low-Speed Control
Large injectors need more than peak flow capacity to work well in a street-driven performance car. Fuel Injector Clinic combines the 1200cc injector's substantial fuel delivery with excellent linearity and superior short pulse width control. These characteristics help the ECU accurately manage fueling during idle and part-throttle operation while still providing the volume required when engine load and fuel demand climb.
Plug-and-Play OEM Harness Connection
The is402-1200h is designed to connect directly to the OEM wiring harness for the listed Mustang applications. No injector plug conversion, solder-in pigtails, or electrical adapters are required for the factory harness connection. Fuel Injector Clinic also supplies the O-rings required for the listed factory applications, helping make the transition to a much higher-flow injector straightforward.
Fitment
- 1987 Ford Mustang GT
- 1988 Ford Mustang GT
- 1989 Ford Mustang GT
- 1990 Ford Mustang GT
- 1991 Ford Mustang GT
- 1992 Ford Mustang GT
- 1993 Ford Mustang GT
- 1993 Ford Mustang Cobra
- 1994 Ford Mustang GT
- 1994 Ford Mustang Cobra
- 1995 Ford Mustang GT
- 1995 Ford Mustang Cobra
- 1996 Ford Mustang GT
- 1996 Ford Mustang Cobra
- 1997 Ford Mustang GT
- 1997 Ford Mustang Cobra
- 1998 Ford Mustang GT
- 1998 Ford Mustang Cobra
- 1999 Ford Mustang GT
- 2000 Ford Mustang GT
- 2001 Ford Mustang GT
- 2002 Ford Mustang GT
- 2003 Ford Mustang GT
- 2004 Ford Mustang GT
Fitment Note: Fuel Injector Clinic supplies these injectors with the O-rings required for the listed factory applications. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
Is Fuel Injector Clinic is402-1200h the replacement for is402-1100H?
Yes. Fuel Injector Clinic identifies the current is402-1200h 1200cc injector set as the replacement for the previous is402-1100H part number for these Mustang applications.
Does the FIC is402-1200h require an injector plug conversion?
No. The is402-1200h is designed for plug-and-play connection to the OEM wiring harness on the listed factory applications, eliminating the need for solder-in pigtails or injector plug adapters.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford Mustang performance and high-horsepower fuel-system combinations. Whether you are upgrading a Fox Body, SN95, or New Edge Mustang GT or building a performance Mustang Cobra, our experienced team can help you select injectors and supporting fuel-system components that match your combination and power goals.
Questions about Fuel Injector Clinic part number is402-1200h or your Mustang fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
