Fuel Injector Clinic 1000cc High-Z Injector Set (is402-1000h) - 1987-2004 Mustang GT / 1993-1998 Mustang Cobra
Give your 1987-2004 Ford Mustang GT or 1993-1998 Mustang Cobra the fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1000cc High-Z injector set. This matched set of eight injectors flows 1000cc/min, or 95 lbs/hr, at 43.5 PSI fuel pressure, providing substantial fueling capability for modified and high-horsepower combinations. Excellent linearity and short pulse width repeatability help deliver the precise control tuners need for responsive idle, clean part-throttle operation, and consistent fueling as engine load and horsepower increase.
Every is402-1000h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency results supplied on the Data Match Sheet for accurate calibration. The set includes PGTUSC8 solder-in pigtails for the required injector connector conversion, while optional PADPUtoJ8 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness. Plug-and-play Ford ECU data is also available from Fuel Injector Clinic to help streamline tuning.
Specifications
- Part Number: is402-1000h
- Application: 1987-2004 Ford Mustang GT / 1993-1998 Ford Mustang Cobra
- Injector Quantity: 8
- Flow Rate: 1000cc/min
- Flow Rate at 43.5 PSI: 95 lbs/hr
- Fuel Pressure Rating: 43.5 PSI / 3 Bar
- Impedance: High impedance / saturated
- Injector Design: Ball and seat
- Included Connector Solution: PGTUSC8 solder-in pigtails
- Optional Connector Solution: PADPUtoJ8 plug-and-play adapters
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Calibration Fluid: CF-16B
- Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Ford ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1000cc/min High-Z performance fuel injectors
- 95 lbs/hr flow rating at 43.5 PSI fuel pressure
- High-impedance saturated injector design
- Excellent linearity throughout the injector operating range
- Superior short pulse width control and repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI / 3 Bar
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC8 solder-in pigtails for the required connector conversion
- Optional PADPUtoJ8 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Plug-and-play Ford ECU calibration data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory applications
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1000cc Fuel Capacity for High-Performance Mustangs
The FIC 1000cc injector provides a major increase in fuel capacity for Mustang combinations that have moved beyond the capabilities of smaller injectors. With 1000cc/min of flow, the is402-1000h is designed to support the increased fuel demand of modified and high-horsepower applications while maintaining the control required for a properly calibrated performance car. Whether your Mustang is built for the street, strip, or a combination of both, these injectors deliver the fuel capacity needed to support more serious power goals.
Data Match Technology for Precise Tuning
Consistent fuel delivery across all eight cylinders is critical when pushing a Mustang beyond stock power levels. Fuel Injector Clinic precisely matches each is402-1000h set using proprietary Data Match Technology. Every injector is individually serial numbered, and detailed flow matching and latency results are supplied on the Data Match Sheet. This provides your tuner with accurate injector data for more consistent cylinder-to-cylinder fueling and precise calibration throughout the operating range.
High Flow Without Sacrificing Drivability
Fuel Injector Clinic combines substantial flow capacity with excellent linearity and superior short pulse width control. These characteristics help the ECU accurately manage fuel delivery during idle and part-throttle operation while providing the increased volume required under heavier engine load. The result is a high-flow injector designed to support serious performance while retaining the predictable behavior needed for a street-driven Mustang.
Connector Options for a Clean Installation
The is402-1000h requires an injector connector conversion for the listed Mustang applications. Fuel Injector Clinic includes PGTUSC8 solder-in pigtails, allowing the existing injector connectors on the vehicle harness to be replaced. Optional PADPUtoJ8 plug-and-play adapters are available for owners who prefer to connect the injectors without cutting or soldering the factory wiring harness. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 1987 Ford Mustang GT
- 1988 Ford Mustang GT
- 1989 Ford Mustang GT
- 1990 Ford Mustang GT
- 1991 Ford Mustang GT
- 1992 Ford Mustang GT
- 1993 Ford Mustang GT
- 1993 Ford Mustang Cobra
- 1994 Ford Mustang GT
- 1994 Ford Mustang Cobra
- 1995 Ford Mustang GT
- 1995 Ford Mustang Cobra
- 1996 Ford Mustang GT
- 1996 Ford Mustang Cobra
- 1997 Ford Mustang GT
- 1997 Ford Mustang Cobra
- 1998 Ford Mustang GT
- 1998 Ford Mustang Cobra
- 1999 Ford Mustang GT
- 2000 Ford Mustang GT
- 2001 Ford Mustang GT
- 2002 Ford Mustang GT
- 2003 Ford Mustang GT
- 2004 Ford Mustang GT
Fitment Note: Fuel Injector Clinic supplies these injectors with the O-rings required for the listed factory applications. If your Mustang uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
Does the Fuel Injector Clinic is402-1000h require an injector plug conversion?
Yes. The is402-1000h includes PGTUSC8 solder-in pigtails for converting the injector connections. Optional PADPUtoJ8 plug-and-play adapters are available if you prefer to install the injectors without cutting or soldering the factory wiring harness.
What tuning information is available for the FIC is402-1000h injector set?
Each injector is individually serial numbered, and detailed flow matching and latency results are provided on the Data Match Sheet. Fuel Injector Clinic also makes plug-and-play Ford ECU data available to help tuners accurately calibrate the injector set.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Ford Mustang performance and high-horsepower fuel-system combinations. Whether you are upgrading a Fox Body, SN95, or New Edge Mustang GT or building a performance Mustang Cobra, our experienced team can help you choose the injectors and supporting fuel-system components that match your setup and power goals.
Questions about Fuel Injector Clinic part number is402-1000h or your Mustang fuel system? Email Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
