Fuel Injector Clinic 1440cc (160 lbs/hr at OE 58 PSI) Fuel Injector Set - High Z (Jeep 3.6L V6 Engines) (is232-1440h)
Step up the fueling capability of your Jeep 3.6L V6 with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. Part number is232-1440h includes six saturated, high-impedance injectors rated at 1440cc/min (140 lbs/hr) at 43.5 PSI (3 Bar) and 1700cc/min (160 lbs/hr) at the OE 58 PSI (4 Bar) fuel pressure. Designed to bridge the gap between FIC's 1200cc and 1650cc injectors, this set delivers serious fuel capacity while maintaining the precise low-speed control and drivability needed in a street-driven performance Jeep. Drop-in fitment with the factory-style connector also means no injector plug conversion is required.
Fuel Injector Clinic's 1440cc high-impedance injector features stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each is232-1440h set is precisely matched using FIC's proprietary Data Match Technology. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is232-1440h
- Injector Quantity: 6
- Flow Rating at 43.5 PSI: 1440cc/min (140 lbs/hr)
- Flow Rating at OE 58 PSI: 1700cc/min (160 lbs/hr)
- OE Fuel Pressure: 58 PSI (4 Bar)
- Injector Type: Saturated / high impedance
- Valve Construction: Stainless alloy
- Matching: Fuel Injector Clinic Data Match Technology
- Plug Fitment: Drop-in factory-style connector, no plug conversion required
- FIC Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Seals: Includes the O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1440cc high-impedance fuel injectors for Jeep 3.6L V6 engines
- Flows 1440cc/min (140 lbs/hr) at 43.5 PSI (3 Bar)
- Flows 1700cc/min (160 lbs/hr) at the OE 58 PSI (4 Bar) fuel pressure
- Drop-in fitment with the factory-style electrical connector
- No injector plug conversion required
- High-flow design supports higher-horsepower applications on both gasoline and E85
- Excellent idle performance makes the 1440cc injector well suited to powerful street-driven combinations
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Proprietary Data Match Technology provides precise injector set matching
- Each injector is individually serial numbered for identification and documentation
- Includes a Data Match Sheet with detailed flow matching and latency information
- Superior short pulse width control supports precise low-flow fueling and excellent drivability
- State-of-the-art matching helps provide predictable injector behavior for accurate tuning
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F
- Testing performed using CF-16B calibration fluid
- Supplied with the O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Drop-In Installation
The is232-1440h injector set is designed for easy installation with drop-in fitment and a factory-style electrical connector, so no injector plug conversion is required for the listed factory application. Fuel Injector Clinic also configures the injectors with the O-rings required for proper factory fitment. If your Jeep uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- Jeep 3.6L V6 Engines
FAQs
Why is the is232-1440h rated at both 1440cc and 1700cc?
Injector flow changes with fuel pressure. Fuel Injector Clinic rates this injector at 1440cc/min (140 lbs/hr) at its standard 43.5 PSI (3 Bar) test pressure. At the Jeep application's OE 58 PSI (4 Bar) fuel pressure, the injector flows 1700cc/min, or 160 lbs/hr.
Do the Fuel Injector Clinic is232-1440h injectors require wiring adapters or a plug conversion?
No. Fuel Injector Clinic specifies drop-in fitment with the factory-style connector for the is232-1440h Jeep 3.6L V6 injector set, so no injector plug conversion is required for the listed factory application.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing specializes in high-performance fuel system upgrades and can help you select the right injectors and supporting components for your Jeep 3.6L V6 build. Whether you have questions about injector sizing, fuel compatibility, fuel pressure, tuning requirements, or aftermarket fuel system fitment, our performance specialists can help you choose the correct components for your combination.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
