Apex SM-10RE 19x9 Forged Wheel - 5x130 BP / ET50 / 71.6mm CB - Satin Black (Porsche) SM10RE199ET50-5130-716-NSBK
The Apex SM-10RE is the endurance-focused forged evolution of the popular SM-10 wheel, engineered specifically for drivers who demand exceptional strength, stiffness, and reliability under extreme motorsport conditions. Designed for high-load track environments, endurance racing, and aggressive street performance, the SM-10RE features Apexs strongest lip design and highest load rating to handle repeated abuse lap after lap.
Built for Porsche applications utilizing a 5x130 bolt pattern and 71.6mm center bore, this forged wheel combines advanced engineering, reinforced construction, and race-ready details to deliver outstanding brake clearance, sharper steering response, and long-term durability for serious performance enthusiasts.
Engineered for Endurance Racing Abuse
While many motorsport wheels prioritize lightweight construction above all else, the SM-10RE was developed with additional rigidity and durability for demanding applications. Compared to the SM-10RS, the Enduro version is approximately 30 percent stronger, making it ideal for vehicles utilizing high-grip tires, aerodynamic downforce, and aggressive track setups.
The heavy-duty Enduro Spec inner lip introduces Apexs strongest inner barrel reinforcement ever, featuring approximately 50 percent more reinforcement to better survive rough curbing, potholes, uneven track surfaces, and off-track excursions.
A reinforced front lip further improves impact resistance while maintaining the aggressive motorsport appearance expected from the SM-10RE lineup.
Fully Forged 6061-T6 Construction
Each SM-10RE wheel is fully forged from premium 6061-T6 aluminum using an immense 10,000 ton forging process. This extreme pressure improves grain structure, minimizes porosity, and maximizes overall wheel strength and durability.
Unlike many competitors that rely on generic third-party forging blanks, Apex engineered proprietary motorsport-specific forging blanks to optimize brake clearance, spoke geometry, structural efficiency, and concavity for vehicle-specific applications.
Advanced Finite Element Analysis (FEA) was used throughout development to strengthen high-load areas while removing unnecessary material in lower-stress zones, optimizing both durability and weight.
Stiffer Side-Milled Spokes
The SM-10RE features redesigned side-milled spokes that are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased spoke rigidity helps reduce camber loss during hard cornering, improving steering feel, responsiveness, tire stability, and outer shoulder tire wear.
Precision CNC side-milling removes excess material while maintaining structural integrity, helping the wheel achieve an impressive strength-to-weight ratio despite its endurance-focused construction.
Track-Ready Motorsport Features
The SM-10RE incorporates numerous race-proven engineering features tailored specifically for serious track enthusiasts. Paintless knurled beads improve tire retention during repeated hard acceleration and braking, while the paintless barrel reduces rotational inertia to improve acceleration and braking response.
A capless hub design removes unnecessary weight, and oversized lug openings allow compatibility with race hardware and impact sockets for faster wheel swaps at the track.
Laser-engraved wheel specifications remain easy to identify even after repeated heat cycles and extended track use.
Every Apex Enduro Line wheel is independently tested by ITS in Michigan under conditions exceeding standard JWL testing requirements for additional peace of mind.
Specifications
- Part Number: SM10RE199ET50-5130-716-NSBK
- Wheel Model: SM-10RE
- Wheel Size: 19x9
- Bolt Pattern: 5x130 BP
- Offset: ET50
- Center Bore: 71.6mm
- Finish: Satin Black
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Enduro Spec Reinforced Inner Lip
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged endurance wheel engineered for extreme track and motorsport use
- Approximately 30 percent stronger than SM-10RS wheels
- 20 to 25 percent stiffer spokes improve steering precision and stability
- Heavy-duty Enduro Spec reinforced inner lip
- Reinforced front lip improves durability against impacts and curbing
- Fully forged 6061-T6 aluminum construction
- Manufactured using a 10,000 ton forging process
- FEA-optimized structure balances strength and reduced weight
- Deep side-milled spokes reduce unnecessary rotational mass
- Independent ITS testing exceeds JWL standards
- Vehicle-specific spoke profiles maximize brake clearance
- High-clearance barrel design supports large brake kits
- Paintless knurled bead improves tire retention
- Paintless barrel reduces rotational inertia
- Capless hub design minimizes unnecessary weight
- Oversized lug openings fit race hardware and impact sockets
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications improve long-term visibility
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Designed for Porsche applications utilizing a 5x130 bolt pattern and 71.6mm center bore.
Ideal for high-performance Porsche street, track, and endurance racing builds requiring maximum wheel strength and exceptional brake clearance.
Always verify brake clearance, suspension clearance, and tire fitment before installation.
FAQs
What makes the SM-10RE different from the SM-10RS?
The SM-10RE is Apexs endurance-focused forged wheel featuring additional structural reinforcement, stronger lips, and stiffer spokes specifically engineered for extreme track and endurance racing conditions.
Will these wheels clear aftermarket big brake kits?
Yes. Apex engineered the SM-10RE with vehicle-specific spoke profiles and a high-clearance barrel design to maximize compatibility with large factory and aftermarket brake systems.
Why Buy from Beefcake Racing?
Beefcake Racing offers premium performance parts, expert customer support, and competitive pricing for enthusiasts building serious street and track vehicles. Whether you're upgrading your Porsche for endurance racing, HPDE events, or aggressive street driving, our team can help you select the right setup.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
