BMR Non-Adjustable Tubular Lower A-Arms (AA006R) - 67-69 F-Body / 68-74 X-Body
A-arms are one of the most important, yet overlooked suspension components, serving as the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.625-inch, 0.120-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces, deflection is completely eliminated with lower A-arms from BMR Suspension. BMR's AA006 arms come pre-assembled with heavy-duty lower ball joints, polyurethane bump stops, and greasable, internally fluted 95-durometer polyurethane bushings.
Engineered for street performance, drag racing, handling, and pro-touring applications, the AA006R lower A-arms provide two additional degrees of positive caster for enhanced high-speed stability and lateral cornering grip. Designed specifically for models with bump stops located on the front side of the lower control arm, this upgrade improves front suspension geometry while maintaining a comfortable ride. Finished in a durable red powdercoat, installation typically takes 3–4 hours.
Note: This version is specifically designed for vehicles with the bump stop located on the front side of the lower A-arm. Be sure to inspect your vehicle's subframe and bump stop location before ordering. Control arm hardware kit RH006 is highly recommended for complete installation.
Features
- Eliminates lower A-arm deflection for precise alignment and handling
- Improves steering feel, response, and high-speed straight-line stability
- Fabricated from heavy-duty 1.625-inch, 0.120-inch wall DOM steel tubing
- Laser-cut, CNC-formed plate steel braces for extra strength
- Fixture welded for a precise, direct-fit installation
- Built-in 2 degrees of additional positive caster
- Pre-assembled with greasable, internally fluted 95-durometer polyurethane bushings
- Includes new heavy-duty lower ball joints and polyurethane bump stops
- Durable red powdercoat finish
- 3–4 hour installation time
- Proudly designed and built in the USA
Fitment
- 1967 Chevrolet Camaro (models with front-side lower A-arm bump stops)
- 1968 Chevrolet Camaro (models with front-side lower A-arm bump stops)
- 1969 Chevrolet Camaro (models with front-side lower A-arm bump stops)
- 1967 Pontiac Firebird (models with front-side lower A-arm bump stops)
- 1968 Pontiac Firebird (models with front-side lower A-arm bump stops)
- 1969 Pontiac Firebird (models with front-side lower A-arm bump stops)
- 1968 Chevrolet Chevy II / Nova
- 1969 Chevrolet Nova
- 1970 Chevrolet Nova
- 1971 Chevrolet Nova
- 1972 Chevrolet Nova
- 1973 Chevrolet Nova
- 1974 Chevrolet Nova
- 1971 Pontiac Ventura
- 1972 Pontiac Ventura
- 1973 Pontiac Ventura
- 1974 Pontiac Ventura
- 1973 Buick Apollo
- 1974 Buick Apollo
- 1973 Oldsmobile Omega
- 1974 Oldsmobile Omega
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
