Whipple Stage 1 Kit (20172020 F-150 / Raptor 3.5L EcoBoost) EB-8110
50-State Legal Stage 1 Performance System for 3.5L EcoBoost Trucks
The Whipple Stage 1 Kit is a complete, emissions-compliant performance upgrade for the 20172020 Ford F-150 and Raptor 3.5L EcoBoost. Engineered to deliver massive real-world gains while maintaining OEM-level safety, this system combines Whipples advanced cooling, airflow, and calibration technologies into one bolt-on package.
At the core is the Whipple Mega Cooler, an oversized intercooler that dramatically reduces charge temperatures for consistent power. Paired with a roto-molded high-velocity cold air intake and Whipples industry-leading custom calibration, the Stage 1 kit produces up to 100 RWHP and 130 lb-ft of torque over stock. Even more impressive, gains exceed 150 lb-ft at 3,500 RPM, delivering exceptional power under the curve and throttle response.
The Mega Cooler features 54% greater volume and 8% more surface area than the factory intercooler. Its bar-and-plate construction with offset fins on both the hot and cold sides improves heat rejection while fitting within the stock location. Testing shows intake temperature drops of ~60°F on the dyno and 100°F+ during steady-state torture testing.
Whipples CAD-driven, CFD-modeled intake system reduces inlet restriction and increases air speed. The velocity-stack gauze filter with extra-wide pleats flows up to 132% more air than a stock paper filter. Completing the system is Whipples calibration, developed through extensive dyno and real-world testing to maximize output while retaining factory-type safety limits. The included Whipple flash tool enables easy file uploads, DTC read/clear, live data, and data logging.
Performance Highlights
- Up to +100 RWHP and +130 lb-ft* over stock
- Mega Cooler intercooler with 54% more volume
- Up to 60°F dyno and 100°F+ real-world temp reduction
- Roto-molded high-velocity cold air intake
- Air filter flows up to 132% more than stock paper
- Custom Whipple calibration with OEM-level safety limits
- Improved shift schedule, higher RPM shift points, and pedal mapping
- Auto start/stop disabled and increased speed limiter
- No cutting or grinding required
- CARB certified for 50-state legal use
Quick Specs
- Part Number: EB-8110
- Vehicle: Ford F-150 / Raptor
- Engine: 3.5L EcoBoost
- Model Years: 20172020
- Intercooler: Whipple Mega Cooler, bar-and-plate
- Volume Increase: +54% vs stock
- Surface Area Increase: +8% vs stock
- Cold Air Intake: Roto-molded high-velocity design
- Calibration: Whipple custom tune with flash tool
- Fuel Requirement: 93 octane recommended
- Installation Time: ~2.25 hours
- Emissions: 50-state legal (CARB EO D-231-64 for 20182020)
FAQs
Does the Stage 1 kit require cutting or permanent modifications?
No. This system is a direct bolt-on upgrade with no cutting or grinding required and includes Whipples calibration.
What kind of drivability changes should I expect?
Expect significantly stronger mid-range torque, faster throttle response, refined shift behavior, and consistent power thanks to lower intake temperatures.
Fitment
- 2017 Ford F-150 3.5L EcoBoost
- 2018 Ford F-150 3.5L EcoBoost
- 2019 Ford F-150 3.5L EcoBoost
- 2020 Ford F-150 3.5L EcoBoost
- 2017 Ford Raptor 3.5L EcoBoost
- 2018 Ford Raptor 3.5L EcoBoost
- 2019 Ford Raptor 3.5L EcoBoost
- 2020 Ford Raptor 3.5L EcoBoost
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for Whipple EcoBoost performance systems backed by real-world enthusiast experience. Need help confirming compatibility or planning supporting upgrades? Call 1-855-827-7223 or email sales@beefcakeracing.com.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
