TRZ Motorsports Universal Tie-Rod / Bump Steer Kit for Rack and Pinion - Length: 6.000 (5.750 - 7.000) - 202-600
Extended-Range Bump Steer & Tie-Rod Adjuster Kit for Pinto Rack Systems
The TRZ Motorsports Universal Tie-Rod / Bump Steer Kit in the 6.000? (5.750 - 7.000?) adjustment range is engineered for race cars and custom chassis builds that require longer tie-rod adjusters to achieve proper steering geometry correction. This kit replaces non-adjustable tie-rod ends and allows precise tuning to effectively minimize bump steer when set up correctly.
Compatible with both standard and narrowed Pinto rack-and-pinion setups using 1/2-20 threaded ends, the kit includes durable chrome-moly rod ends, high-strength Grade 8 hardware, and lightweight 6061 aluminum spacers. Installation requires drilling the spindle or steering arm tapered hole to 1/2? for proper hardware fitment.
TRZ provides detailed steps for measuring your vehicle's A-Dimension to ensure you select the correct adjuster length. If your required measurement exceeds 7?, you will need the Universal Weld-Up Kit to build a custom-length adjuster.
Performance Features
- Replaces fixed tie-rod ends for accurate steering tuning
- Helps reduce bump steer when properly adjusted
- Extended adjustable length: 5.750? - 7.000?
- Chrome-moly rod ends for strength and longevity
- 6061 aluminum spacers included
- Includes Grade 8 hardware
- Requires drilling spindle/steering arm to 1/2?
- Fits Pinto rack-and-pinion with 1/2-20 tie-rod threads
How to Measure Your A-Dimension
- Point wheels straight ahead
- Center the rack-and-pinion assembly
- Aim tie-rods toward steering arm mounting hole
- Measure from rack thread end to hole center
- Both sides must match - unequal values indicate an off-center rack
Weld-Up Kit Includes (If Required)
- (2) 12? pieces of 1? 4130 tubing
- (2) 1/2-20 Right-Hand tube inserts
- (2) 1/2-20 Left-Hand tube inserts
Quick Specs
- Application: Universal tie-rod and bump steer adjuster kit
- Adjustable Length: 5.750? - 7.000?
- Thread Type: 1/2-20 (Pinto rack compatible)
- Rod Ends: Chrome-moly
- Spacers: 6061 aluminum
- Hardware: Grade 8
- Part Number: 202-600
Frequently Asked Questions
Do I need to drill the spindle or steering arm?
Yes. You must drill the tapered hole to 1/2? so the supplied hardware fits properly.
When do I need the weld-up kit?
If your A-Dimension exceeds 7 inches, TRZ recommends the weld-up kit to create a custom-length adjuster.
Why Buy from Beefcake Racing?
Beefcake Racing supplies genuine TRZ Motorsports steering and suspension components with fast shipping and expert tech support. For assistance choosing the right bump steer kit or steering setup, contact sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
