TRZ Motorsports Universal Tie-Rod / Bump Steer Kit for Rack and Pinion - Length: 4.250 (4.000 - 5.250) - 202-425
Adjustable Tie-Rod & Bump Steer Kit for Pinto Rack-and-Pinion Systems
The TRZ Motorsports Universal Tie-Rod / Bump Steer Kit in the 4.000? - 5.250? adjustable range is engineered to replace factory non-adjustable tie-rod ends and provide the precision needed to maintain proper steering geometry. Whether you're building a drag car or a custom chassis setup, this kit is designed to minimize bump steer when dialed in correctly.
Ideal for both standard and narrowed Pinto rack-and-pinion setups using 1/2-20 tie-rod threads, the kit includes durable chrome-moly rod ends, high-strength Grade 8 hardware, and lightweight 6061 aluminum spacers. Installation requires drilling the spindle or steering arm's tapered hole to 1/2?.
TRZ provides straightforward instructions for measuring your vehicle's A-Dimension, ensuring you choose the correct adjuster length. If your measurement exceeds 7?, TRZ recommends using the Universal Weld-Up Kit to build a custom-length adjuster.
Performance Features
- Replaces non-adjustable tie-rod ends for improved geometry
- Helps minimize bump steer when properly adjusted
- Adjustable from 4.000? to 5.250?
- Chrome-moly rod ends included
- 6061 aluminum spacers for lightweight strength
- Grade 8 hardware for maximum durability
- Requires drilling stock spindle/steering arm to 1/2?
- Compatible with standard and narrowed Pinto racks (1/2-20 thread)
How to Measure Your A-Dimension
- Point wheels straight forward
- Center rack-and-pinion assembly
- Align tie-rods toward steering arm hole
- Measure from rack thread end to hole center
- Both sides must match - unequal values indicate an off-center rack
Weld-Up Kit Includes (If Needed)
- (2) 12? pieces of 1? 4130 tubing
- (2) 1/2-20 RH tube inserts
- (2) 1/2-20 LH tube inserts
Quick Specs
- Application: Universal rack-and-pinion bump steer corrector
- Adjustable Length: 4.000? - 5.250?
- Thread Type: 1/2-20 (Pinto rack compatible)
- Rod Ends: Chrome-moly
- Spacers: 6061 aluminum
- Hardware: Grade 8
- Part Number: 202-425
Frequently Asked Questions
Do I need to drill my steering arm or spindle?
Yes. You must drill the tapered hole to 1/2? so the supplied hardware seats properly.
How do I know whether to choose the weld-up kit?
If your A-Dimension exceeds 7 inches, TRZ recommends the weld-up kit for a custom-length setup.
Why Buy from Beefcake Racing?
Beefcake Racing provides real tech support and fast shipping on all genuine TRZ Motorsports components. For help selecting the right steering or bump steer solution, contact sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
