TRZ Motorsports Universal Tie-Rod / Bump Steer Kit for Rack and Pinion - Length: 3.500 (3.250 - 4.500) - 202-350
Adjustable Bump Steer & Tie-Rod Kit for Rack-and-Pinion Applications
The TRZ Motorsports Universal Tie-Rod / Bump Steer Kit provides full steering adjustability for performance builds running a standard or narrowed Pinto rack-and-pinion with 1/2-20 threads. With an adjustment range of 3.250? to 4.500?, this kit replaces non-adjustable tie-rod ends and gives you the precision tuning needed to maintain correct steering geometry and minimize bump steer.
The kit includes high-strength chrome-moly rod ends, Grade 8 fasteners, and lightweight 6061 aluminum spacers. Installation requires drilling the factory spindle or steering arm tapered hole to 1/2? for proper hardware fitment.
TRZ provides an easy method to determine your suspension's A-Dimension. If your A-Dimension exceeds 7?, the recommended solution is the Universal Weld-Up Kit, which includes 4130 tubing and RH/LH inserts for building a custom-length adjuster.
Performance Features
- Eliminates non-adjustable tie-rod ends for improved geometry control
- Helps reduce bump steer when properly adjusted
- Adjustable length range: 3.250? - 4.500?
- Chrome-moly rod ends for durability
- 6061 aluminum spacers included
- Grade 8 hardware for maximum strength
- Requires drilling spindle/steering arm to 1/2?
- Fits standard or narrowed Pinto rack-and-pinion (1/2-20 thread)
How to Measure Your A-Dimension
- Point wheels straight forward
- Center your rack-and-pinion
- Aim tie-rods at the steering arm mounting hole
- Measure from rack thread end to hole center
- Both sides must match - unequal measurements mean the rack is not centered
Weld-Up Kit Includes (If Required)
- (2) 12? pieces of 1? 4130 tubing
- (2) 1/2-20 Right-Hand inserts
- (2) 1/2-20 Left-Hand inserts
Quick Specs
- Application: Universal Pinto rack bump steer kit
- Adjustable Length: 3.250? - 4.500?
- Thread Type: 1/2-20
- Rod Ends: Chrome-moly
- Spacers: 6061 aluminum
- Hardware: Grade 8
- Part Number: 202-350
Frequently Asked Questions
Do I need to drill my factory spindle or steering arm?
Yes. The tapered hole must be drilled out to 1/2? to fit the supplied hardware correctly.
What if my measured A-Dimension is longer than 7??
You will need the Universal Weld-Up Kit, which provides tubing and inserts to build a custom-length adjuster.
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for authentic TRZ Motorsports steering and suspension components. For help choosing the correct bump steer kit or steering parts, contact sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
