KPM Fuel Systems are proud to release the highest level of direct fit fuel systems for the S650 Mustang.
With the modern Mustangs being tuned to amazing power levels comes the need for a high-performance fuel system.
KPM have met this need with a direct replacement high performance fuel system that will perfectly support power levels from standard all the way to 1500 hp.
No other Mustang fuel module supports as much power with the efficiency, functionality, and fuel delivery of the KPM 1500 hp fuel systems!
KPM 1500 hp Fuel Module
The KPM 1500 hp Fuel Module is engineered utilizing 2 x high performance Bosch Racing fuel pumps, all housed in an OEM style high-flow fuel canister and distribution manifold. The KPM fuel module is mounted and immersed in the vehicle’s fuel tank as per OEM design and for ease of fitment.
The development and testing of the KPM module was focused on supplying guaranteed delivery of cool, dense fuel to support 1500 hp at the engine on pump fuel. Our objective was also the supply of solid fuel delivery in both everyday road driving and extreme track conditions, regardless of fuel level in the tank
To achieve these objectives, our KPM Fuel System engineer designed and incorporated a four Venturi pump and refill valve system designed to scavenge fuel from both sides of the Mustang fuel tank and permanently keep the fuel canister full.
This means that you can run the KPM fuel module at any fuel level safely across all conditions without the risk of surge or fuel starvation, including during spirited driving, circuit days, or drag racing.
The fuel pumps are 100% gasoline, ethanol and methanol compatible and able to deliver massive amounts of cool, dense fuel at standard vehicle voltages.
This equates to optimum tuning and power levels up to 1500 hp (flywheel rated on 94 octane)
Controlling fuel pump current will keep fuel cool and dense preventing vaporization, retaining maximum energy for optimum power.
Advantages
- Cool dense fuel
- Prevent atomization
- Full upgradable to run up to 4 pumps for future use
- Prevents long cranking times
- Maximum engine power potential
- Repeatable and predictable engine performance
- Ease of tuning
- Extended fuel pump and fuel system reliability
- Relieving the electrical system of excessive load
- Extended long idling and driving periods
- Provides maximum fuel system and engine reliability
Features
- Direct plug and play fitment when used with KPM 1500 hp and 2200 hp Fuel Modules
- Easy fitment with instructions provided
- Pre-programmed settings to suit supported vehicle make and model
- OE programmable when used on vehicles with a Factory Fuel System Control Module (FSCM)
- 2 driver outputs at 40 amps each
- Ability to run 1,2, 3, or 4 x high volume pumps
- 4-gauge outputs 0-5v able to monitor e.g.: fuel pressure, temperature, pulse width, amperage
- On-board temperature protection sensor
- Everything provided for a hassle-free fitment
Vehicles Factory Fuel System Control Module (FSCM)
S650 Mustang
The Mustang factory fuel system runs one small amperage fuel pump (approx. 8-12 amps), therefore, the OE FSCM Fuel Module Controller is designed to electronically control only one small amperage fuel pump and no more.
The KPM 1500 hp Fuel System runs two fuel pumps at approx. 16-18 amps each. This is a total of 36-38 amps. You can see that the factory FSCM cannot support the amperage of larger pumps.
The KPM PWM is wired into the factory harness with plug and play connectors to mimic the factory FSCM control signal and therefore requesting the KPM Fuel Systems pumps achieve fuel pressure that the PCM wants to see.
Fitment
The KPM 1500 hp Fuel and PWM System is a direct replacement system. The addition of the PWM easily mounted as per the instructions provided.
The only extra requirement is to route the high amperage wiring and connector kit, that comes supplied with easy fit OEM style plug and play connectors.
The KPM 1500 hp fuel system is now ready for your tuning professional to calibrate your fuel system and tune your vehicle as normal with any well-known tuning software.
Included in the Kit
Mustang S650: KPMMUS1500PWM-24-LHD
- KPM 1500 hp in-tank Fuel Module
- KPM PWM Fuel Module Controller
- Easy fit high amperage relay and wiring kit
- Fitting and calibration instruction included
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
