Ford F-150 Interchiller -Colder IAT's + Street or Drag!!
IC Chiller system don’t Cut ‘N Splice into OEM AC System. We provide bolts-on pre-assembled lines / hoses / fittings and AC lines clamps in the kit.
Application: 2011-2025 F-150
F150 Intercooler Chiller system can be used on street or drag racing. Street mode let you enjoy the “cabin” AC and lower IAT. The supercharger charge air coolant passes through IC Chiller unit, where it is further cooled by the refrigerant. That chilled supercharger coolant then goes through coolant bricks in the supercharger housing, cooling compressed air as it enters the intake ports.
IC Chiller has solenoid on the liquid line going to the cabin so you get 2 modes of operation.
- Chiller and Cabin mode
- Drag mode (Chiller only / Race only)
Note: With drag race mode, When activated using rocker switch, refrigerant from the AC system is diverted from the cabin to the chiller unit.
Ford F150 Interchiller system includes every parts that is required to make the DIY or custom install simple such as mounting bracket, Drag valve with connector, and wiring kit with Deutsch connectors that plug into drag valve and 3-way bypass valve.
Ford F150 Interchiller uses the car’s air conditioning refrigerant to help further cool the air entering the engine’s cylinders. Cooler air is denser, containing more oxygen molecules per volume than warm air. With more oxygen entering the engine, adding more fuel produces more power.
Kit Contents: HE Brick, Mounting bracket, O-rings fittings, Hoses, Clamps, drag valve, wiring kit
Coolant 3-way bypass provides the flexibility to bypass the OEM HE during race mode for optimal results. Coolant side is not part of PnP kit and requires basic understanding of plumbing and flow diagrams. Also, It would require hose, clamps and fittings to complete the install.
Features and Benefits
-
Bolt-on, Plug-and-Play Installation – Comes with pre-assembled lines, hoses, clamps, brackets, wiring, and Deutsch connectors—no cutting or splicing into your factory AC needed.
-
Dual-Mode Operation – Installs a solenoid with a rocker switch to toggle between Cabin + Chiller (street) mode and Chiller-only (drag race) mode.
-
Lower Intake Air Temps (IATs) Dramatically – Supercharges your intercooler coolant with AC refrigerant, achieving significantly colder intake temps for denser air and more power.
-
Prevents Heat Soak and Detonation – Keeps intake temps low even under sustained boost runs or high ambient temps, reducing ignition timing pull and the risk of knock.
-
Maintains Cabin Comfort – Street mode allows full AC performance for daily driving without compromise.
-
Race-Track Safe – In drag mode, the cabin evaporator is bypassed to avoid condensation, meeting track tech requirements.
-
Proven Design and Construction – Patented chiller core ensures even refrigerant flow across plates; hoses and fittings exceed SAE J2064 standards for durability.
-
Real-World Performance Gains – Drag testing shows IAT drops of up to 50 °F (≈ 28 °C), and on dyno setups, gains include regained ignition timing and measurable horsepower increases.
-
Universal Compatibility – Designed for 2011–2025 F-150s with water-to-air intercooler systems (supercharged or turbo) and an A/C system; includes trims like Raptor, Tremor, Platinum, Lariat, King Ranch, even Police Responder.
-
Comprehensive Warranty and Support – Beefcake Racing and FI Interchillers back the system with full component warranties, and expert installation and tech advice are just a call/email away.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
