DJM Suspension 4" Lowering Control Arms (1988-1998 C1500 / Silverado / Sierra) - CA2555L-4
4" Front Drop with Corrected Geometry for OBS GM Trucks
The DJM Suspension 4" Lowering Control Arms (Part Number CA2555L-4) are engineered for 1988-1998 Chevy C1500, Silverado, and GMC Sierra 2WD trucks. These lower control arms are designed specifically to work with 2" lowering coil springs CS2351-2 for a total 4" front drop.
Unlike lowering spindles that can introduce clearance problems, CA2555L-4 eliminates those issues by properly repositioning critical suspension geometry. DJM shifts the ball joint angles, sway bar end link mounting points, bump stops, and coil spring pocket to improve fit, maintain alignment capability, and optimize performance on lowered applications.
Each arm comes equipped with new ball joints, urethane bushings, and DJM twin tube pivot sleeves pre-installed for a simplified bolt on installation.
Note: Must be used with 2" lowering coil springs CS2351-2.
DJM Recommended Components
- Front Shock: 1315 (sold individually)
- Upper Control Arm: CA2555U
Features
- Designed for 1988-1998 C1500, Silverado, and Sierra 2WD
- 4" front drop when used with CS2351-2 springs
- Eliminates clearance issues associated with drop spindles
- Repositioned ball joint angles for proper geometry
- Revised sway bar end link mounting points
- Corrected bump stop and coil spring pocket placement
- Includes new ball joints installed
- Includes urethane bushings and twin tube pivot sleeves
- Lower control arms only
Quick Specs
- Manufacturer: DJM Suspension
- Part Number: CA2555L-4
- Component Type: Lower Control Arms
- Drop: 4" total with CS2351-2 springs
- Spring Requirement: Must use CS2351-2 (2" lowering coils)
- Recommended Shock: 1315
- Recommended Upper Arm: CA2555U
- Vehicle Application: 1988-1998 Chevy C1500 / Silverado / GMC Sierra
FAQs
Can I use these without lowering springs?
No. CA2555L-4 must be used with 2" lowering coil springs CS2351-2 to achieve the intended 4" drop.
Do these fix wheel clearance problems from drop spindles?
Yes. These arms are designed to eliminate the clearance issues commonly caused by spindle based lowering setups.
Fitment
- 1988 Chevrolet C1500
- 1989 Chevrolet C1500
- 1990 Chevrolet C1500
- 1991 Chevrolet C1500
- 1992 Chevrolet C1500
- 1993 Chevrolet C1500
- 1994 Chevrolet C1500
- 1995 Chevrolet C1500
- 1996 Chevrolet C1500
- 1997 Chevrolet C1500
- 1998 Chevrolet C1500
- 1988 Chevrolet Silverado 1500
- 1989 Chevrolet Silverado 1500
- 1990 Chevrolet Silverado 1500
- 1991 Chevrolet Silverado 1500
- 1992 Chevrolet Silverado 1500
- 1993 Chevrolet Silverado 1500
- 1994 Chevrolet Silverado 1500
- 1995 Chevrolet Silverado 1500
- 1996 Chevrolet Silverado 1500
- 1997 Chevrolet Silverado 1500
- 1998 Chevrolet Silverado 1500
- 1988 GMC Sierra 1500
- 1989 GMC Sierra 1500
- 1990 GMC Sierra 1500
- 1991 GMC Sierra 1500
- 1992 GMC Sierra 1500
- 1993 GMC Sierra 1500
- 1994 GMC Sierra 1500
- 1995 GMC Sierra 1500
- 1996 GMC Sierra 1500
- 1997 GMC Sierra 1500
- 1998 GMC Sierra 1500
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for genuine DJM Suspension components. Our team understands OBS GM truck suspension geometry and can help you build a proper 4" drop setup that maintains clearance, alignment, and ride quality.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
