DJM Suspension 3" Front / 5" Rear Complete Lowering Kit - Shocks Included (2007-2015 Chevy Silverado with Cast Iron Steering Knuckle) - DJM2507-3/5
Aggressive 3/5 Drop for 2007-2015 Silverado with Cast Iron Knuckles
The DJM2507-3/5 Complete Lowering Kit delivers a true 3" front and 5" rear drop for 2007-2015 Chevy Silverado trucks equipped with cast iron steering knuckles. This system sharpens stance while preserving proper suspension geometry, alignment capability and drivability.
Up front, engineered upper and lower control arms work with your factory coil over struts to achieve the 3" drop. Full alignment, correct ball joint angles and proper clearances are built into the design to maintain an exceptional street ride.
Out back, a heavy duty axle flip kit provides the 5" rear drop. The system includes adjustable axle brackets to allow pinion angle correction, along with new shackle hangers that invert the shackle mounting point. Longer shackles then position the rear at the full five" drop while maintaining driveline alignment.
For certain 2015 models, including some 2014 4x4 and early 2016 configurations, verify compatibility before ordering to ensure correct component selection.
Shocks are included to properly control suspension movement at the lowered ride height.
Features
- 3" front drop using upper and lower control arms
- Designed for factory coil over struts
- Maintains alignment capability and correct ball joint angles
- 5" rear drop using axle flip kit
- Adjustable axle brackets for pinion angle correction
- Inverted shackle hanger design with longer shackles
- Engineered specifically for cast iron steering knuckle models
- Shocks included
Recommended and Replacement Parts
- Rear Shock 2100
- Press In Upper Ball Joint 6540
- Bolt On Upper Ball Joint 6136
- Lower Ball Joint 6541
- Upper Bushing Kit BK2007U
- Lower Bushing Kit BK2007L
Quick Specs
- Manufacturer: DJM Suspension
- Part Number: DJM2507-3/5
- Front Drop: 3"
- Rear Drop: 5"
- Front Components: Upper and lower control arms
- Rear Components: Axle flip kit with adjustable brackets and shackle hangers
- Steering Knuckle Requirement: Cast iron steering knuckle only
- Shocks Included: Yes
- Vehicle Application: 2007-2015 Chevy Silverado with cast iron steering knuckle
FAQs
Will this kit fit aluminum steering knuckle trucks?
No. This kit is engineered specifically for Silverado models equipped with cast iron steering knuckles.
How is pinion angle corrected after lowering?
The axle flip kit includes adjustable axle brackets that allow proper pinion angle adjustment once the rear is lowered.
Fitment
- 2007 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2008 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2009 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2010 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2011 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2012 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2013 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2014 Chevrolet Silverado 1500 with cast iron steering knuckle
- 2015 Chevrolet Silverado 1500 with cast iron steering knuckle
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for genuine DJM Suspension lowering systems for GM trucks. Our team can help verify steering knuckle type and ensure proper compatibility before ordering.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
