DJM Suspension 3" Front / 4" Rear Complete Lowering Kit - Shocks Included (2007-2014 Chevy Tahoe / Suburban / Avalanche with Cast Iron Steering Knuckle) - DJM2007-3/4
Complete 3/4 Drop System for Cast Iron Knuckle SUVs
The DJM2007-3/4 Complete Lowering Kit delivers a properly engineered 3" front and 4" rear drop for 2007-2014 Chevy Tahoe, Suburban, and Avalanche models equipped with Cast Iron Steering Knuckles. This kit is designed to achieve a more aggressive stance while maintaining correct suspension geometry and alignment.
Up front, the system retains your factory coil over struts and uses both upper and lower control arms. The lower control arms provide the full 3" drop, while the upper control arms optimize ball joint angles and allow for proper factory alignment at the lowered height.
In the rear, 4" lowered coil springs are paired with relocation brackets that move the trailing arms down and away from the frame for proper clearance. New rear sway bar endlinks reposition the sway bar away from surrounding suspension components to prevent interference during suspension travel.
This complete kit includes the required shocks to ensure proper damping and ride control at the new ride height.
Important Fitment Note
This kit is designed exclusively for vehicles equipped with Cast Iron Steering Knuckles. It is not compatible with cast aluminum steering knuckle applications. Verify your suspension configuration before ordering.
Features
- 3" front drop using upper and lower control arms
- Upper arms correct ball joint angles for proper alignment
- Retains factory coil over front struts
- 4" rear drop via engineered lowering coil springs
- Rear relocation brackets for trailing arm clearance
- New rear sway bar endlinks included
- Shocks included for correct suspension performance
- Designed specifically for cast iron steering knuckle models
Shock and Strut Information
- Front STOCK strut or shock recommended
- Rear Shock 2000 - sold each
Quick Specs
- Manufacturer: DJM Suspension
- Part Number: DJM2007-3/4
- Front Drop: 3"
- Rear Drop: 4"
- Front Components: Upper and lower control arms
- Rear Components: 4" lowering coil springs and relocation brackets
- Steering Knuckle Requirement: Cast Iron
- Shocks Included: Yes
- Vehicle Application: 2007-2014 Tahoe / Suburban / Avalanche with Cast Iron Steering Knuckle
Replacement Parts
- Upper Ball Joint 6124
- Lower Ball Joint 6541
- Upper Bushing Kit BK2007U
- Lower Bushing Kit BK2007L
FAQs
Will this kit allow proper alignment after lowering?
Yes. The included upper control arms are engineered to correct ball joint angles and allow for proper factory alignment at a 3" front drop.
Does this kit work with aluminum steering knuckles?
No. This system is designed specifically for cast iron steering knuckle applications only.
Fitment
- 2007 Chevrolet Tahoe
- 2008 Chevrolet Tahoe
- 2009 Chevrolet Tahoe
- 2010 Chevrolet Tahoe
- 2011 Chevrolet Tahoe
- 2012 Chevrolet Tahoe
- 2013 Chevrolet Tahoe
- 2014 Chevrolet Tahoe
- 2007 Chevrolet Suburban
- 2008 Chevrolet Suburban
- 2009 Chevrolet Suburban
- 2010 Chevrolet Suburban
- 2011 Chevrolet Suburban
- 2012 Chevrolet Suburban
- 2013 Chevrolet Suburban
- 2014 Chevrolet Suburban
- 2007 Chevrolet Avalanche
- 2008 Chevrolet Avalanche
- 2009 Chevrolet Avalanche
- 2010 Chevrolet Avalanche
- 2011 Chevrolet Avalanche
- 2012 Chevrolet Avalanche
- 2013 Chevrolet Avalanche
- 2014 Chevrolet Avalanche
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for genuine DJM Suspension lowering systems and components. Our team ensures you get the correct cast iron knuckle kit so your Tahoe, Suburban, or Avalanche achieves the stance and performance you are after.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
