DJM Suspension 3" Front / 4" Rear Complete Lowering Kit - Shocks Included (2004-2014 Colorado / Canyon) - DJM2400-3/4
Performance Focused 3/4 Drop for 2004-2014 Colorado and Canyon
The DJM2400-3/4 Complete Lowering Kit delivers a serious stance upgrade with a 3" front and 4" rear drop for 2004-2014 Chevy Colorado and GMC Canyon trucks. This setup combines DJMs Calmax Control Arms up front with engineered rear components to give you aggressive height reduction without sacrificing suspension function.
Up front, Calmax Control Arms provide a full 3" drop while retaining the suspension travel GM originally designed into the Colorado platform. The result is proper alignment capability, no wheel clearance issues and a front end that maintains factory geometry. Note: These control arms will not work on torsion bar suspension applications.
In the rear, heavy duty 4" all steel lowering blocks provide the drop. You will notice the built in angle in the blocks. This design properly sets the pinion angle when installed with the tall side toward the rear so the block angles forward. It is an important detail engineered by DJM for correct driveline alignment.
Shocks are included with this kit to properly control suspension movement at the new ride height.
Features
- 3" front drop using DJM Calmax Control Arms
- Retains factory designed suspension travel
- Maintains alignment capability and wheel clearance
- 4" rear drop using angled all steel lowering blocks
- Built in pinion angle correction
- Engineered for strut front suspension applications
- Shocks included
Recommended and Replacement Parts
- Factory front shocks
- Shock 2100
- Lower Ball Joint OEM
- Lower Bushing Kit BK2400L
Quick Specs
- Manufacturer: DJM Suspension
- Part Number: DJM2400-3/4
- Front Drop: 3"
- Rear Drop: 4"
- Front Components: Calmax Control Arms
- Rear Components: 4" angled all steel lowering blocks
- Pinion Correction: Built in block angle
- Shocks Included: Yes
- Vehicle Application: 2004-2014 Colorado / Canyon with strut suspension
FAQs
Will this kit work on torsion bar equipped models?
No. The Calmax Control Arms are designed for strut equipped front suspensions and will not fit torsion bar applications.
Why are the rear blocks angled?
The built in angle corrects the pinion angle when installed properly with the tall side toward the rear, helping maintain proper driveline alignment after lowering.
Fitment
- 2004 Chevrolet Colorado
- 2005 Chevrolet Colorado
- 2006 Chevrolet Colorado
- 2007 Chevrolet Colorado
- 2008 Chevrolet Colorado
- 2009 Chevrolet Colorado
- 2010 Chevrolet Colorado
- 2011 Chevrolet Colorado
- 2012 Chevrolet Colorado
- 2013 Chevrolet Colorado
- 2014 Chevrolet Colorado
- 2004 GMC Canyon
- 2005 GMC Canyon
- 2006 GMC Canyon
- 2007 GMC Canyon
- 2008 GMC Canyon
- 2009 GMC Canyon
- 2010 GMC Canyon
- 2011 GMC Canyon
- 2012 GMC Canyon
- 2013 GMC Canyon
- 2014 GMC Canyon
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for genuine DJM Suspension lowering systems. Our team understands Colorado and Canyon suspension setups and can help confirm compatibility before you order.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
