DJM Suspension 3" Front / 5" Rear Lowering Kit - Spindle with 1.00" Rotors - Shocks Included (1973-1987 C10) - DJM2045L-3/5 (1 rotor)
3/5 Drop Kit for 1973-1987 C10 with 1.00" Rotors
The DJM2045L-3/5 (1 rotor) Complete Lowering Kit delivers a true 3" front and 5" rear drop for 1973-1987 Chevy C10 trucks equipped with 1.00" thick front brake rotors. This system combines classic drop spindle performance up front with a proven rear flip kit for an aggressive squarebody stance.
Up front, the kit uses 3" lowering spindles designed specifically for 1.00" brake rotors. Rotor thickness is critical. If your truck has 1.25" rotors, the correct kit is DJM2045H-3/5.
In the rear, a rear axle flip kit relocates the axle from beneath the leaf spring to the top of the leaf spring, delivering a full 5" drop. No C-section is required on the C10 frame because adequate clearance remains for proper suspension travel.
Shocks are included to properly control suspension movement at the lowered ride height.
Important Rotor Fitment Note
This kit works only with 1.00" front brake rotors. Measure rotor thickness before ordering. If equipped with 1.25" rotors, use DJM2045H-3/5 instead.
Features
- 3" front drop using drop spindles
- Compatible only with 1.00" brake rotors
- Maintains factory steering geometry
- 5" rear drop using axle flip kit
- No C-section required on C10 frame
- Maintains suspension travel
- Shocks included for proper ride control
- Designed specifically for 1973-1987 C10 trucks
Recommended Shocks
- Front Shock 1409 - sold each
- Rear Shock 2100 - sold each
Quick Specs
- Manufacturer: DJM Suspension
- Part Number: DJM2045L-3/5 (1 rotor)
- Front Drop: 3"
- Rear Drop: 5"
- Front Component: 3" drop spindles
- Rotor Requirement: 1.00" brake rotors
- Rear Component: Axle flip kit
- Shocks Included: Yes
- Vehicle Application: 1973-1987 C10
Additional Hardware Option
If your original U-bolts need replacement, consider DJM2045L-3/5LTD, which includes new U-bolts and leaf spring plates.
FAQs
Do I need to C-section the frame for the 5" rear drop?
No. The C10 frame has sufficient clearance built in, so a C-section is not required with this flip kit.
How do I verify rotor thickness?
Measure the thickness of your front brake rotors before ordering. This kit is designed specifically for 1.00" rotors.
Fitment
- 1973 Chevrolet C10
- 1974 Chevrolet C10
- 1975 Chevrolet C10
- 1976 Chevrolet C10
- 1977 Chevrolet C10
- 1978 Chevrolet C10
- 1979 Chevrolet C10
- 1980 Chevrolet C10
- 1981 Chevrolet C10
- 1982 Chevrolet C10
- 1983 Chevrolet C10
- 1984 Chevrolet C10
- 1985 Chevrolet C10
- 1986 Chevrolet C10
- 1987 Chevrolet C10
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for genuine DJM Suspension lowering systems for classic C10 builds. Our team can help confirm rotor thickness and ensure you receive the correct 3/5 drop kit for your squarebody project.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
