Vortech V-3 SCi-Trim Supercharger System & Charge Cooler - Polished (2005 Nissan 350Z Non Rev-Up / Infiniti G35) 4NZ218-058L
Polished V-3 SCi-Trim Complete Supercharger System for 350Z & G35
The Vortech V-3 SCi-Trim Supercharger System & Charge Cooler (PN 4NZ218-058L) is a complete, fully calibrated bolt-on supercharging system engineered for the 2005 Nissan 350Z Non Rev-Up and Infiniti G35. Finished in a high-visibility polished configuration, this system pairs Vortech's internally lubricated V-3 SCi-Trim centrifugal supercharger with an air-to-air Charge Cooler to deliver strong, repeatable power with OEM-like drivability.
On an otherwise stock application, the system delivers approximately 7.5-8.5 PSI at factory redline and raises output to around 412 horsepower. Vortech's centrifugal design produces linear, top-end power while remaining easier on the engine than turbocharger-based alternatives.
V-3 SCi-Trim Supercharger Technology
The V-3 SCi-Trim represents the next evolution of Vortech's SC platform. The "i" stands for improved, incorporating a patented oil control system and a state-of-the-art centrifugal compressor stage developed in Vortech's supercharger lab. With up to 75% adiabatic efficiency (SAE J1723), the SCi-Trim generates less heat, reduces drive losses, and produces more usable horsepower - enhancing durability and engine safety.
Air-to-Air Charge-Cooled Configuration
This system integrates an air-to-air Charge Cooler to lower intake air temperatures and increase charge density. Improved thermal control supports consistent performance and provides headroom for future power upgrades.
Included Components & Features
- Vortech gear-driven centrifugal supercharger with high-efficiency impeller and housing
- Air-to-air Charge Cooler for reduced intake air temperatures
- Fuel management upgrade including high-flow fuel pump and fuel management unit (FMU)
- Stand-alone ignition timing control computer for seamless acceleration
- Billet aluminum supercharger mounting bracket for factory-style fit and rigidity
- Maxflow Racing Bypass Valve for surge-free compressor operation
- Heat-resistant silicone couplers with premium stainless steel clamps
- Reusable high-flow air filter
- Complete supercharger drive system with all required belts and pulleys
Performance Highlights
- Horsepower: Approximately 412 HP
- Torque: Approximately 355 lb-ft
- Boost Pressure: 7.5-8.5 PSI at factory redline
- Excellent drivability with potential for improved fuel economy during normal use
Installation Notes
- Estimated installation time: 10-12 hours
- Complete, bolt-on system with supplied calibration
- Professional installation recommended
Optional & Replacement Parts
- 20mm Supercharger Pulleys: 34T, 32T, 30T, 28T
- 20mm Jackshaft Pulleys: 34T, 32T
- 6-Rib Supercharger Pulleys: 2A036-312, 2A036-287, 2A036-262 (smaller sizes may require machining)
- Hardware Kits: 4NZ100-001 (Standard), 4NZ100-002 (Rev-Up)
- Spacer Kit for standard and Rev-Up bracket configurations (hardware sold separately)
- Maxflow Billet Race Blow-Off Valve (direct replacement for included bypass valve)
Warranty Information
- 1-Year Supercharger Limited Warranty included
- Optional 3-Year Supercharger Limited Warranty available with V-3 superchargers (additional $50; street-legal systems only)
Quick Specs
- Manufacturer: Vortech Superchargers
- Part Number: 4NZ218-058L
- System Type: Complete Supercharger System
- Supercharger: V-3 SCi-Trim
- Charge Cooling: Air-to-Air Charge Cooler
- Boost: 7.5-8.5 PSI
- Finish: Polished
Fitment
- 2005 Nissan 350Z Non Rev-Up
- 2005 Infiniti G35
Emissions & Legal Compliance
- 50-State Emissions Legal
- CARB Executive Order # D-213-27 (2005-2006)
FAQs
- Is this system street legal?
Yes. This complete system is 50-state emissions legal under CARB Executive Order D-213-27 for applicable model years. - Can this system be upgraded later?
Yes. Vortech offers pulley and component upgrades for additional power when you're ready.
Why Buy from Beefcake Racing?
Beefcake Racing is an authorized Vortech Superchargers dealer with extensive experience supporting Nissan 350Z and Infiniti G35 performance builds. We help ensure your system is configured correctly, installed cleanly, and supported long after the sale.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
