Vortech Superchargers - V-3 Si Trim High Output Complete System Satin (2007-2008 Mustang V6 4.0L) - 4FU218-640L
High Output Vortech V-3 Si Supercharger System for 2007-2008 Mustang V6
The Vortech V-3 Si Trim High Output Complete Supercharger System is the top-tier, emissions-legal power solution for the 2007-2008 Ford Mustang V6 4.0L. This system is engineered for both manual and automatic transmissions and includes a fully integrated air-to-water charge cooler to support higher boost and consistent power delivery.
Factory output on the 4.0L V6 Mustang is approximately 210 horsepower and 240 lb-ft of torque. With this High Output Vortech system installed, output jumps to an impressive 330 horsepower and 337 lb-ft of torque at factory redline using 10 PSI of boost on 91-octane fuel.
V-3 Si Trim Centrifugal Supercharger Technology
This system features Vortech's advanced V-3 Si Trim centrifugal supercharger in a durable satin finish. The Si compressor stage achieves up to 78% adiabatic efficiency (SAE J1723), reducing discharge temperatures, lowering parasitic loss, and increasing net power. The self-contained lubrication system on V-3 models eliminates engine oil feed and drain lines for a cleaner, easier installation.
Integrated Air-to-Water Charge Cooling
The High Output configuration includes a dual-pass air-to-water charge cooler that allows the system to safely run higher boost levels while maintaining stable intake air temperatures. Cooler, denser air improves detonation resistance and ensures repeatable performance during aggressive street driving or track use.
Complete System Components & Features
- V-3 Si Trim centrifugal supercharger - satin finish
- 3.25" supercharger pulley (High Output configuration)
- Boost pressure: 10 PSI @ factory redline
- Self-contained lubrication (V-3 systems)
- Diablosport In-Tune handheld programmer with Vortech 91-octane calibration
- High-flow fuel injectors
- Integrated air-to-water dual-pass charge cooler
- High-flow bypass valve for surge-free operation
- 98mm MAF housing
- High-flow conical air filter with heat shield
- Roto-molded inlet ducting with silicone couplers and stainless clamps
- Billet aluminum supercharger mounting bracket with idlers, belt, and hardware
Upgrade Paths & Optional Accessories
- Water Tank Upgrade: 8N105-120 - 2-gallon reservoir for increased charge cooler capacity
- 6-Rib Supercharger Pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287, 2A036-262
- Tuner Kits for custom fuel and calibration on higher-output builds
Quick Specs
- Manufacturer: Vortech Superchargers
- Part Number: 4FU218-640L
- Vehicle: Mustang V6
- Engine: 4.0L V6
- Model Years: 2007, 2008
- Transmission: Manual & Automatic
- Supercharger: V-3 Si Trim
- Finish: Satin
- Boost: 10 PSI
- Output: 330 HP / 337 lb-ft
- Charge Cooling: Air-to-Water
- Install Time: Approx. 12-14 hours
FAQs
Is this High Output system CARB legal?
Yes. This complete High Output system is 50-state emissions legal under CARB Executive Order D-213-27.
Can this system support future upgrades?
Yes. Vortech offers tuner kits and pulley options that allow experienced builders to support significantly higher power levels with proper fueling and custom calibration.
Vehicle Fitment
- 2007 Ford Mustang V6 4.0L
- 2008 Ford Mustang V6 4.0L
Why Buy from Beefcake Racing?
Beefcake Racing is a trusted Vortech supercharger specialist. We help ensure correct part selection, CARB compliance clarity, and long-term upgrade planning so your Mustang build delivers exactly the performance you expect.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
