Vortech Superchargers V-2 Si-Trim Complete System - Standard Output - Polished (2005-2008 Mustang V6) 4FU218-638SQ
Polished V-2 Si-Trim Standard Output Complete Supercharger System for 2005-2008 Mustang V6
The Vortech Superchargers V-2 Si-Trim Standard Output Complete System (PN 4FU218-638SQ) is a fully calibrated, 50-state emissions-legal supercharger system engineered for 2005-2008 Ford Mustang V6 models equipped with the 4.0L engine. Featuring a show-quality polished finish, this Standard Output (non-cooled) system delivers strong, reliable gains while preserving factory drivability on 91-octane fuel.
From the factory, the 2005-2008 Mustang V6 produces 210 horsepower and 254 lb-ft of torque. This Standard Output system safely increases output to 290 horsepower and 294 lb-ft of torque at the factory redline using 8 PSI of boost. Complete systems are available for both manual and automatic transmission vehicles.
V-2 Si-Trim Supercharger Technology
The V-2 Si-Trim centrifugal supercharger is built around Vortech's advanced compressor stage developed in their supercharger test cell. With peak efficiency of up to 78% (SAE J1723 standard), the Si-Trim generates less heat, reduces drive power requirements, and produces more net power - benefits that translate into strong performance and improved durability.
As an engine oil-fed design, the V-2 includes oil feed and drain assemblies to provide excellent lubrication and cooling, even during sustained boost operation.
Complete System Configuration
This is a true complete system that includes the required fuel system upgrades and ECU calibration. Vortech supplies a Diablosport In-Tune handheld programmer that re-flashes the ECM with a safe Vortech calibration for 91-octane fuel, supporting consistent results with OEM-like street manners.
Included Components & Features
- V-2 Si-Trim centrifugal supercharger with 3.60" drive pulley (Standard Output)
- Manifold boost pressure: 8 PSI @ factory redline on stock engine
- High-efficiency impeller and compressor housing developed in Vortech's supercharger test cell
- Supplied Diablosport In-Tune handheld programmer with Vortech ECU calibration for 91-octane fuel
- Fuel system upgrade with high-flow replacement fuel injectors
- High-flow bypass valve for surge-free compressor operation
- High-flow air inlet system including:
- Roto-molded intake ducting
- Silicone couplers with stainless steel clamps
- 98mm MAF housing
- High-flow conical air filter with heat shield
- Billet aluminum supercharger mounting bracket with idlers, drive belt, and all mounting hardware
- Engine oil feed and drain assemblies for optimal supercharger lubrication and cooling
Installation Notes
- Estimated installation time: 8-10 hours (Standard Output)
- Professional installation recommended
- System availability includes manual and automatic transmission vehicles
Quick Specs
- Manufacturer: Vortech Superchargers
- Part Number: 4FU218-638SQ
- Application: 2005-2008 Ford Mustang V6 4.0L
- System Type: Complete Supercharger System
- Output: 290 HP / 294 lb-ft (Standard Output configuration)
- Factory Output: 210 HP / 254 lb-ft
- Boost Pressure: 8 PSI
- Supercharger: V-2 Si-Trim (Oil-Fed)
- Finish: Polished
- Fuel & Calibration: Diablosport In-Tune programmer + high-flow injectors (91-octane calibration)
Emissions & Legal Notice
- 50-State Emissions Legal
- CARB Executive Order: D-213-27
Optional Parts & Accessories
- High Output Charge Cooler Upgrade: Direct bolt-on air-to-water Charge Cooler upgrade for the 2005-2008 4.0L V6 Standard Output system; increases output to 330 HP & 337 lb-ft at 10 PSI at the factory redline on an otherwise stock engine
- 6-Rib Supercharger Pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287
FAQs
- Is this complete system street legal in all 50 states?
Yes. This complete system is CARB approved and 50-state legal under EO D-213-27. - Can I upgrade this Standard Output system to a Charge-Cooled setup later?
Yes. Vortech offers a direct bolt-on air-to-water Charge Cooler upgrade that increases output to 330 HP and 337 lb-ft at 10 PSI on an otherwise stock engine.
Fitment
- 2005 Ford Mustang V6 4.0L
- 2006 Ford Mustang V6 4.0L
- 2007 Ford Mustang V6 4.0L
- 2008 Ford Mustang V6 4.0L
Why Buy from Beefcake Racing?
Beefcake Racing is an authorized Vortech Superchargers dealer with extensive experience supporting S197 Mustang builds. We help ensure correct system selection, upgrade compatibility, and expert support from purchase through installation.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
