Vortech V-3 Si-Trim Supercharger Complete System - Standard Output Satin (2005-2008 Mustang V6) | 4FU218-630L
Standard Output Vortech V-3 Si-Trim Supercharger System for 2005-2008 Mustang V6
Vortech offers a fully calibrated Standard Output complete supercharger system for the 2005-2008 4.0L V6 Mustang, designed for both manual and automatic transmission vehicles. This system features the highly efficient V-2 or V-3 Si-Trim centrifugal supercharger, delivering reliable, street-friendly power without charge cooling.
This standard output configuration increases horsepower from 210 to 290 HP and torque from 254 lb-ft to 294 lb-ft with 8 PSI of boost at factory redline using CA 91-octane fuel.
Advanced Vortech Si-Trim Technology
The 4.0L V6 Mustang system utilizes Vortech's V-2 or V-3 Si-Trim supercharger, developed through extensive lab testing. The Si-Trim features a state-of-the-art centrifugal compressor stage with an industry-leading 78% adiabatic efficiency (SAE J1723), resulting in lower heat generation, reduced parasitic loss, and increased net power output.
Reduced heat improves durability under sustained boost, while Vortech's centrifugal design weighs significantly less than many competing supercharger systems.
Superior Centrifugal Supercharging Performance
Centrifugal superchargers produce greater airflow and pressure than roots-style blowers while operating more efficiently. Vortech supercharger systems deliver exceptional horsepower gains per dollar and, when driven normally, fuel economy may even improve.
Complete System Components & Features
- V-2 or V-3 Si-Trim centrifugal supercharger with 3.60-inch drive pulley
- Technologically advanced, high-efficiency impeller and housing design
- Manifold boost pressure of 8 PSI at redline on stock engine
- Diablosport In-Tune handheld programmer with safe Vortech calibration for 91-octane fuel
- Fuel system upgrade with high-flow replacement fuel injectors
Air Inlet System
- High-flow roto-molded air inlet ducting
- Silicone sleeves with stainless steel clamps
- 98mm MAF meter housing
- High-flow conical air filter with heat shield
- High-flow bypass valve for surge-free compressor operation
Mounting & Lubrication
- Billet aluminum supercharger mounting bracket with idlers, drive belt, and all hardware
- V-3 superchargers feature a self-contained lubrication system
- V-2 models include oil feed and drain assemblies for sustained boost operation
Quick Specs
- Manufacturer: Vortech Superchargers
- System Type: Complete Supercharger System
- Supercharger: V-3 Si-Trim
- Output Level: Standard Output
- Finish: Satin
- Max Output: 290 HP / 294 lb-ft
- Boost: 8 PSI
- Adiabatic Efficiency: 78%
- Estimated Install Time: 8-10 hours
- Part Number: 4FU218-630L
Optional Parts & Accessories
- High Output Air-to-Water Charge Cooler Upgrade - Direct bolt-on upgrade increasing output to 330 HP and 337 lb-ft at 10 PSI on a stock engine
- 6-rib supercharger pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287
Emissions & Legal Information
This complete system is 50-State Emissions Legal per the California Air Resources Board (CARB) under Executive Order D-213-27.
Fitment
- 2005 Ford Mustang V6 4.0L
- 2006 Ford Mustang V6 4.0L
- 2007 Ford Mustang V6 4.0L
- 2008 Ford Mustang V6 4.0L
Why Buy from Beefcake Racing?
Beefcake Racing specializes in forced-induction performance and Vortech supercharger systems. Our team provides expert guidance to help you choose the right setup, plan supporting modifications, and get the most out of your supercharger investment.
sales@beefcakeracing.com
1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
