Vortech Superchargers Tuner Kit w/ V-2 Si-Trim - Satin - NO Charge Cooler (2007-2009 Ford Mustang GT 4.6L 3V)
Satin V-2 Si-Trim Oil-Fed Tuner Supercharger Kit for 2007-2009 Mustang GT
The Vortech Superchargers V-2 Si-Trim Tuner Kit (PN 4FU218-130SQ) is engineered for 2007-2009 Ford Mustang GT models equipped with the 4.6L 3-Valve V8. Finished in a durable satin coating, this tuner kit delivers Vortech's proven centrifugal supercharger performance while leaving full control of fueling and calibration to the professional tuner.
This configuration is supplied without a Charge Cooler and without fuel system upgrades or ECM programming. It is intended strictly for off-road and competition use where custom engine management and fuel strategies are preferred.
V-2 Si-Trim Supercharger Technology
The V-2 Si-Trim is an oil-fed centrifugal supercharger designed for applications that see extended boost and sustained high load. Sharing the engine's lubrication system provides excellent oil control and cooling under continuous operation, making the V-2 series a strong choice for aggressive street/strip builds and track-focused setups.
Vortech's advanced impeller and housing design delivers efficient airflow with reduced parasitic loss, allowing the engine to make more usable power with less heat.
Tuner Kit Configuration Explained
Vortech tuner kits include the complete supercharger, air inlet, and mounting hardware found in complete systems, but intentionally exclude fuel injectors, fuel pumps, and ECU calibration. This allows experienced tuners and racers to tailor fuel delivery and tuning to match specific engine combinations and performance goals.
For reference, High Output complete systems for earlier 4.6L 3V Mustang GT applications are capable of boosting stock engines to approximately 462 horsepower when fully equipped and calibrated.
Included Components & Features
- V-2 Si-Trim centrifugal supercharger (oil-fed)
- 3.80" drive pulley (Standard Output)
- 3.60" drive pulley (High Output)
- Manifold boost pressure: 8 PSI (Std. Output), 10 PSI (High Output) @ redline on stock engine
- High-contact-ratio, precision helical gear drive for quiet operation and durability
- High-efficiency, computer-designed impeller and housing developed in Vortech's supercharger test cell
- High-flow air inlet assembly including:
- Roto-molded intake ducting
- Silicone sleeves with stainless steel clamps
- 98mm MAF housing and high-flow air filter with heat shield
- Replacement engine coolant pipes and hose assemblies
- Billet aluminum supercharger mounting bracket with idlers, drive belt, and all mounting hardware
- Engine oil feed and drain assemblies for supercharger lubrication
- Heat-resistant silicone inlet and discharge connections with premium stainless steel clamps
Installation Notes
- Estimated installation time: 8-10 hours (Standard Output)
- Estimated installation time: 12-14 hours (High Output)
- Professional installation and custom tuning strongly recommended
Quick Specs
- Manufacturer: Vortech Superchargers
- Part Number: 4FU218-130SQ
- Application: 2007-2009 Ford Mustang GT 4.6L 3V
- Kit Type: Tuner Kit
- Supercharger: V-2 Si-Trim (Oil-Fed)
- Finish: Satin
- Boost Capability: 8-10 PSI (configuration dependent)
- Charge Cooler: None
Optional Parts & Accessories
- Supercharger Pulleys (6-Rib): 2A036-348, 2A036-333, 2A036-312, 2A036-287
- Supercharger Pulleys (8-Rib): 2A038-348, 2A038-333, 2A038-312, 2A038-295
- Fuel Pump Voltage Booster: 5A102-038 - Maxflow Plug-and-Play Voltage Booster Assembly
- Hardware Kit: 4FU100-001 - Spare and replacement supercharger mounting hardware
Emissions & Legal Notice
- NOT AVAILABLE OR LEGAL FOR SALE IN CALIFORNIA
- Tuner kits are NOT CARB legal
- For off-road and race-use-only vehicles
- Installation on emissions-controlled vehicles may violate U.S. federal emissions law (42 U.S.C. 7522(a)(3))
Warranty Information
- 1-Year Supercharger Limited Warranty (standard for tuner kits)
- 3-Year warranty available only with V-3 superchargers purchased as part of complete street-legal systems
FAQs
- Does this kit include fuel injectors or tuning?
No. This is a tuner kit and does not include fuel system upgrades or ECU calibration. - Is a Charge Cooler included?
No. This configuration is supplied without a Charge Cooler.
Fitment
- 2007 Ford Mustang GT 4.6L 3V
- 2008 Ford Mustang GT 4.6L 3V
- 2009 Ford Mustang GT 4.6L 3V
Why Buy from Beefcake Racing?
Beefcake Racing is an authorized Vortech Superchargers dealer with extensive experience supporting S197 Mustang builds. From custom tuner setups to high-boost race applications, our team ensures your system is selected correctly and supported from purchase through installation.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
