Vortech Supercharger System w/ V-3 Si-Trim - Satin w/ Charge Cooler (2007-2008 Mustang GT 4.6 3V) 4FU218-040L
Satin V-3 Si-Trim Complete Supercharger System for 2007-2008 Mustang GT
The Vortech Supercharger System with V-3 Si-Trim (PN 4FU218-040L) is a complete, fully calibrated centrifugal supercharger system engineered for 2007-2008 Ford Mustang GT models equipped with the 4.6L 3V engine. Finished in a durable satin coating, this configuration includes a fully integrated air-to-water Charge Cooler to maximize power consistency and thermal efficiency.
With the supplied calibration and 91-octane fuel, this system can increase output to approximately 462 horsepower and 419 lb-ft of torque at the flywheel with up to 10 PSI of boost at factory redline, depending on pulley configuration.
V-3 Si-Trim Supercharger Technology
The V-3 Si-Trim centrifugal supercharger represents Vortech's self-contained lubrication design paired with the brand's high-efficiency "Si" compressor stage. Rated at an industry-leading 78% adiabatic efficiency (SAE J1723), the V-3 Si-Trim generates less heat, reduces parasitic load, and delivers more net horsepower compared to lower-efficiency designs.
The self-contained oiling system eliminates the need for external oil feed and drain lines, simplifying installation while maintaining long-term reliability.
Charge-Cooled Complete System Configuration
This is a true complete supercharger system, including fuel system upgrades and ECU calibration. A supplied Diablosport In-Tune handheld programmer reflashes the factory ECM with a safe Vortech calibration optimized for 91-octane fuel, ensuring smooth drivability and dependable performance.
The integrated air-to-water, dual-pass Charge Cooler delivers cooler, denser intake air under boost, helping maintain power output during repeated acceleration or sustained driving.
Included Components & Features
- V-3 Si-Trim centrifugal supercharger with satin finish
- 3.80" drive pulley (standard output) or 3.60" drive pulley (high output)
- Manifold boost pressure: 8 PSI (standard) or 10 PSI (high output) @ redline on stock engine
- Diablosport In-Tune handheld programmer with Vortech calibration for 91-octane fuel
- Fuel system upgrades including high-flow fuel injectors and 255 LPH in-tank fuel pump with harness for dual-pump configuration
- High-flow air inlet system featuring:
- Roto-molded inlet ducting
- 98mm MAF housing
- High-flow conical air filter with heat shield
- Diablosport MAF interface adapter
- Billet aluminum supercharger mounting bracket assembly with idlers, drive belt, and all required hardware
- Engine coolant pipes and hose assemblies
- Integrated air-to-water, dual-pass Charge Cooler system
Installation Notes
- Estimated installation time: 8-10 hours (standard output) or 12-14 hours (high output)
- Professional installation recommended
- Designed for stock internal engines using 91-octane fuel
Quick Specs
- Manufacturer: Vortech Superchargers
- Part Number: 4FU218-040L
- Application: 2007-2008 Ford Mustang GT 4.6L 3V
- System Type: Complete Supercharger System
- Supercharger: V-3 Si-Trim
- Finish: Satin
- Boost Level: Up to 10 PSI
- Output: Approx. 462 HP / 419 lb-ft torque
- Charge Cooler: Air-to-water, dual-pass
Emissions & Legal Notice
- NOT CARB LEGAL FOR MOST 2007-2008 APPLICATIONS
- 2007 systems produced after June 12, 2008 are not exempt
- 2008 systems are not CARB legal
- Legal in California only for racing vehicles that are never registered or driven on public highways
- Installation on emissions-controlled vehicles may violate U.S. federal emissions law (42 U.S.C. 7522(a)(3))
FAQs
- What are the benefits of the V-3 Si-Trim over the V-2?
The V-3 features a self-contained oiling system for easier installation while maintaining high efficiency and durability. - Why choose a Charge-Cooled system?
The integrated Charge Cooler lowers intake air temperatures, helping maintain power consistency during extended or repeated boost events.
Fitment
- 2007 Ford Mustang GT 4.6L 3V
- 2008 Ford Mustang GT 4.6L 3V
Why Buy from Beefcake Racing?
Beefcake Racing is an authorized Vortech Superchargers dealer with deep experience supporting S197 Mustang builds. From expert product guidance to upgrade planning and technical support, our team ensures your V-3 Si-Trim system is configured correctly and performs exactly as intended.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
