Vortech High Output Complete Supercharger System - V-1 H/D Ti, Satin (1986-1993 Mustang 5.0) 4FA218-040T
High Output Satin V-1 H/D Ti Supercharger System for Fox Body Mustang 5.0
The Vortech Superchargers High Output Complete System (PN 4FA218-040T) is a fully calibrated, bolt-on centrifugal supercharger package engineered for 1986-1993 Ford Mustang 5.0L applications. Finished in a durable satin coating, this system utilizes Vortech's Heavy Duty V-1 Ti compressor paired with an air-to-water charge cooling system to deliver strong, repeatable power with the durability required for aggressive street and track use.
This is a complete, street-legal system - not a tuner kit - designed to integrate cleanly with the Fox Body platform while providing reliable high-output performance when installed as intended.
V-1 H/D Ti Supercharger Technology
The V-1 Heavy Duty Ti centrifugal supercharger is designed for demanding performance applications and is capable of supporting up to 950 horsepower depending on engine configuration and custom tuning. This unit features a robust gear-driven design and is engine-oil-lubricated, making it well-suited for sustained high-load operation.
Because the V-1 H/D Ti is engine-oil-fed, it requires oil feed and drain connections. For extreme-duty or track-focused applications, a dedicated oil cooler and/or filter can be added to further enhance thermal control and longevity.
Air-to-Water Charge Cooling Advantage
For Fox Body Mustangs, Vortech employs an air-to-water charge cooler system to minimize pressure loss. Unlike air-to-air systems that route charge air through long tubing paths and large cooler cores, this configuration keeps the airflow path short - resulting in virtually no boost loss compared to non-cooled versions.
Charge cooling delivers cooler, denser air, increasing power output, reducing the detonation threshold, and allowing greater tuning flexibility at higher boost levels.
System Output & Configuration
This High Output system operates in the 7-9 PSI range and is engineered as a complete, fully calibrated package. Vortech also offers Fox Body Mustang systems as tuner kits for extreme custom applications exceeding 2,500-3,000+ horsepower, but this specific part number represents a turnkey street system using the Heavy Duty V-1 Ti supercharger.
Included System Components
- Vortech V-1 H/D Ti centrifugal supercharger (engine oil lubricated)
- Air-to-water charge cooler system
- Cast aluminum supercharger mounting bracket assembly
- Idler assembly, drive belt, and all required mounting hardware
- Fuel system upgrade including T-Rex fuel pump and fuel management unit (FMU)
- High-flow bypass valve for surge-free compressor operation
- Heat-resistant silicone sleeves with stainless steel clamps
- Reusable high-flow air filter
- All necessary belts and pulleys for installation
Technology & Performance Benefits
- SAE J1723-developed high-efficiency impeller and compressor housing
- Centrifugal design delivers higher pressure and flow than roots-type blowers
- Heavy-duty supercharger design supports high horsepower capability
- Charge cooling improves thermal efficiency and durability
- Fuel economy may improve during normal driving conditions
Upgrades & Accessories
- Power Cooler Upgrade Kit for increased horsepower per PSI
- Battery relocation kit (required on all charge-cooled 1986-1993 Mustang systems, sold separately)
- Multiple supercharger pulley options and pulley packages
- Fuel rails, fuel pumps, and fuel management upgrades
- Ignition upgrade assemblies including MSD 6AL-BTM
- Bypass and blowoff valve options
- Supercharger oil cooler
- Replacement hardware kits
CARB & Emissions Compliance
- 50-State emissions legal
- CARB Executive Order: D-213-37
Warranty Information
- 1-Year Supercharger Limited Warranty included
- 3-Year Supercharger Limited Warranty available with V-3 superchargers purchased as part of a complete street-legal system (additional cost)
- Tuner kits are limited to a 1-year warranty
FAQs
- Why choose the V-1 H/D Ti over a V-2 or V-3?
The V-1 H/D Ti is designed for heavy-duty use and supports very high horsepower levels, making it a strong choice for aggressive street or track builds. - Does this system require oil lines?
Yes. The V-1 H/D Ti supercharger is engine-oil-lubricated and requires oil feed and drain connections.
Fitment
- 1986 Ford Mustang 5.0L
- 1987 Ford Mustang 5.0L
- 1988 Ford Mustang 5.0L
- 1989 Ford Mustang 5.0L
- 1990 Ford Mustang 5.0L
- 1991 Ford Mustang 5.0L
- 1992 Ford Mustang 5.0L
- 1993 Ford Mustang 5.0L
Why Buy from Beefcake Racing?
Beefcake Racing is an authorized Vortech Superchargers dealer with decades of Fox Body Mustang experience. From selecting the right heavy-duty supercharger to supporting high-horsepower builds, our team ensures your Vortech system delivers dependable, real-world performance.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
