Paxton NOVI 1200 Supercharger System - Driver Side Mount - Satin Finish (1964-1968 Mustang 260/289/302 V8 | 1969 Mustang 351 Windsor H-Code) - 1001844
Driver-Side Paxton Supercharging for Classic Carbureted Mustangs
The Paxton NOVI 1200 Supercharger System - Driver Side Mount delivers authentic, period-correct centrifugal supercharging for classic carbureted Ford Mustangs. Modeled after the legendary Paxton-equipped Shelby GT-350s of the 1960s, this system is engineered to fit under the factory hood while providing substantial, reliable horsepower gains.
Depending on engine configuration and supporting modifications, this system can deliver 30% to more than 75% horsepower increases. The NOVI 1200 supercharger also provides a clear upgrade path to higher-output Paxton units such as the NOVI 1500.
NOVI 1200 Centrifugal Supercharger Performance
The gear-driven NOVI 1200 centrifugal supercharger provides smooth, linear boost that preserves drivability while significantly improving top-end performance. A 3.7-inch 8-rib pulley produces approximately 7.5 PSI at 5,500 RPM on a stock V8 engine.
Driver Side Mount Configuration
This system features a driver-side supercharger mounting layout, offering a traditional appearance similar to vintage Paxton race setups. This configuration requires an alternator to be installed in place of a generator where applicable and does not support factory power steering or air conditioning.
Carburetor Enclosure & Fuel System Support
A cast aluminum carburetor enclosure is included to properly pressurize the carburetor float bowls and throttle shafts, ensuring stable air/fuel ratios under boost. Supported carburetors include:
- Holley 4150 series
- Quick Fuel Q-750 BAN
- Demon 650 MD 4-barrel
Carburetors must use mechanical secondaries, .120 needle and seat assemblies, and nitrophyll floats. The enclosure features front and rear -8 AN fuel inlet ports along with multiple vacuum and pressure ports. When using a Holley carburetor, the 8M011-001 air diffuser is recommended.
Included Components & Features
- NOVI 1200 centrifugal supercharger - satin finish
- Driver-side supercharger mounting system
- 3.7-inch 8-rib supercharger pulley
- Cast aluminum carburetor enclosure with throttle linkage hardware
- Billet aluminum mounting plate for alternator and supercharger
- Supercharger drive system with belts and pulleys (V-belt setup)
- Aluminum discharge tube with Maxflow Race Bypass Valve
- Boost-referenced mechanical fuel pump
- Fuel filter, fuel lines, and high-flow air filter
Performance Highlights
- Classic driver-side mounting for vintage Paxton appearance
- Smooth centrifugal boost delivery
- Designed to fit under stock hood with factory-style manifolds
- Upgradeable to higher-output Paxton superchargers
Quick Specs
- Manufacturer: Paxton Automotive
- Part Number: 1001844
- Supercharger: NOVI 1200
- Finish: Satin
- Mounting: Driver Side
- Boost: ~7.5 PSI @ 5,500 RPM
- Induction: Carbureted
Optional Upgrades & Accessories
- 8M011-001 - Carburetor air diffuser (recommended for Holley carburetors)
- NOVI 1500 Supercharger Upgrade - For higher horsepower builds
Fitment
- 1964 Ford Mustang 260 V8
- 1964 Ford Mustang 289 V8
- 1965 Ford Mustang 289 V8
- 1966 Ford Mustang 289 V8
- 1967 Ford Mustang 289 V8
- 1968 Ford Mustang 302 V8
- 1969 Ford Mustang 351 Windsor V8 (H-Code)
Installation Notes & Limitations
- Factory stock compression ratio recommended
- Non-stock intake manifolds may require a cowl hood
- Not compatible with generator-equipped vehicles
- Throttle linkage fits 1964-1968 Mustang only
- Compatible with small-diameter distributor caps only
- Not compatible with power steering
- Not compatible with air conditioning
- 1969 351W systems best suited for H-Code engines
FAQs
Does this system support power steering?
No. The driver-side mounting configuration does not support factory power steering.
Can this system be upgraded for more horsepower?
Yes. The NOVI 1200 can be upgraded to higher-output Paxton superchargers such as the NOVI 1500 for more power.
Why Buy from Beefcake Racing?
Beefcake Racing specializes in Paxton supercharger systems for classic and modern Mustangs. We provide expert fitment guidance, configuration support, and technical assistance to ensure your build performs exactly as intended.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
